Create a Communication Link Between Your Front Door and Your Telephones

Channel Vision TE-0212 Telephone Entry and Doorbell Kit

  • Includes the door station and telephone entry system
  • Intercom triggers phones to ring when doorbell is pressed
  • Talk to visitors before opening the door
  • Distinctive ring indicates front-door visitors


The Channel Vision TE-0212 Telephone Entry Kit combines the P-0920 Telephone Entry Controller with Channel Vision’s IU-0212 Intercom Door Station to create an elegant door intercom system. When the doorbell button is pressed, the phones will ring. Simply answer the phone and you will be able to speak to the person at the door.

Find out who’s at the door by answering your phone. When a visitor presses the doorbell on the Telephone Entry System Intercom, it sends a distinctive ring to every telephone in your house. This intercom integrates a weather-resistant speaker/microphone with a doorbell button, which triggers the Telephone Entry Controller to signal you through your phone lines. This system adds safety and convenience to answering the door by allowing you to speak to visitors from any phone in the house before opening your door.

Entry Access
Unlock the front door from your phone by combining the Telephone Entry Controller with a door strike relay, an electric door strike and a 16VAC power supply for the electric door strike. These components are sold separately and require a bit more wiring but once you’re done with this project, unlocking the door for your guests is a snap.

Other Features:

  • Distinctive telephone ring makes it easy to distinguish between door visitors and telephone calls
  • RJ45 & Screw terminal connections
  • No active phone line required
  • LED indicators for ringing, intercom and strike activation

Place this Repeater Between two HDMI Cables for Extended Runs from A Source Component to and HDTV or Monitor

KanexPro HDREPEAT3D HDMI Repeater with 3D Support

  • Supports HDMI1.3b, 1080p video and is 3D compatible
  • 8 levels of equalization
  • Plug-in “active” power

The KanexPro HDREPEAT3D HDMI Repeater extends the length of an HDMI cable run up to 35 meters by regenerating the HDMI signal before it sends the outputs to an HDMI input on an HDTV, monitor or projector. There are few features that make this product stand out from similar devices. Like many other repeaters, it is capable of transmitting an HD signal up to 1080p (225MHz/2.25Gbps per channel, 6.75Gbps all channel, bandwidth), but it also supports 3D transmission along with 12bit per channel, 36bit all channel, deep color. It also supports uncompressed audio such as LPCM and compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD). Additionally there is an HDCP pass-through and an iron-shell for better EMI elimination and it will clean out the digital noise (sparkles) in your picture. Lastly, there is a manually adjustable dial that features 8 levels of equalization settable by turning EQ from 0 to 7, so that support different length of HDMI cable between 1 meter to 35 meters to reach the best transmission function.

This repeater is well suited for Blu-ray, PS3, Xbox360, etc. It offers a solution for residential consumers: HDTV retail and show sites, HDTV, STUB, DVD and Projector factories, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

Remotely Open and Close Somfy® Controlled Drapes via Your INSTEON Network

I/O Linc - INSTEON to Somfy RF Drape Control Kit

  • Everything you need to operate your Somfy controlled drapes from your INSTEON network
  • I/O Linc triggers an RF signal from the Somfy Interface to open or close compatible window coverings
  • INSTEON compatibility for outstanding performance

Do you want the convenience of being able to control your drapes and blinds?  The I/O Linc – INSTEON to Somfy RF Drape Control Kit enhances your INSTEON network by allowing you to remotely operate drapes, blinds and other window coverings powered by Somfy RTS and/or Inteo motors and controls, sold separately. Using INSTEON automation, you can open and close your window coverings at the press of a button using a switch, keypad or remote control. With HouseLinc 2 – INSTEON Desktop Software, you can schedule the blinds to open or close according to sunrise, sunset or any other predetermined time you decide.  You can even use an INSTEON-compatible thermostat to activate a scene when an upper temperature limit is reached that will turn on the air conditioner and close the blinds simultaneously to rapidly cool down your home. This kit is a convenient, easy to use solution ideal for anyone that wants to automate their Somfy RF window coverings using an INSTEON network.  Blocking direct sunlight and maintaining an even temperature in their home is easy with INSTEON.

How It Works
The included Somfy dry contact interface wires directly to the included I/O Linc – INSTEON Low Voltage / Contact Closure Interface (using the included hook up wires), which simply plugs into an available outlet. When I/O Linc receives a signal from any linked INSTEON device, it will trigger a radio frequency (RF) signal to be sent by the Somfy interface to control compatible Somfy RTS or Inteo motors, opening or closing your window coverings.

Required Accessories
This kit contains the pieces required to receive an INSTEON command a transmit a Somfy RF signal using a Somfy Dry Contact Interface. The interface will work with all Somfy RTS and/or Inteo motor and control systems.

Note: The Somfy 3V battery is not needed in this application since power is supplied by the I/O Linc.

    Sarah — los angeles, CA   5/14/2009

This is a dream product. We have several large shades/drapes in our home covering french doors and to be able to push 1 button to open/close them is soooo convenient. One of the first INSTEON products I’ve purchased and I am now hooked. INSTEON makes your life easier!!

Stop Water Leaks Before They Become a Disaster!

KZValve HAI2002 Water Control Valve, 1 1/4 Inch

  • Shutoff your water remotely when a leak is detected
  • Prevents flooding and conserves water
  • Works with home automation systems with flood sensors
  • Equipped with a manual handle for emergency override

By connecting the KZValve HAI2002 water control valve to your home automation system, the water supply to your home or business can be controlled remotely giving you total control of your water supply home or away. This product also works great in conjunction with systems that already have water sensors but lacks the ability to actively turn off the water supply. When combined with an automation system’s existing sensors, our product can react fast before significant water damage can occur.

Benefits of use:

  • Fast Action – opening and closing provides remote control of incoming water supply
  • Added property protection
  • Possible insurance discounts
  • Provide 24 hours a day access to your water supply
  • Conserves water
  • Provides peace of mind

Plasma Proof IR Kit can Control Devices at Custom Lengths up to 1000 Feet Away

Channel Vision IR-5010 Plasma Proof IR Kit
If you are looking for a way to hide away you’re A/V components in a cabinet or another room yet still maintain control of them, the Channel Vision IR-5010 Plasma Proof IR Kit is the ideal solution. Equipped with the ability to control 4 remote A/V devices, the IR-5010 is expandable to control additional A/V devices with via single (83613) or dual emitters (83612) (sold separately).

The plasma resistant IR receiver provides protection from interference caused by most plasma TVs that can inhibit the IR signal from being repeated.

The plasma friendly receiver connects to the IR block via three conductor wire (sold separately). Using Cat5 (8493GRY) or other multi-conductor wire (three or more), simply connect the IR receiver to the IR block at any custom length you need up to 1000′.

  • Plasma Proof IR receiver to avoid interference
  • Complete with IR receiver, block, emitters and power supply
  • Wired IR receiver can be connected to block at custom lengths
  • 4 device control expandable to 8

Keep Your Cat Hydrated, Refreshed, and Healthy with Filtered and Purified Water

Petmate 24572 UV Light Infinity Cat Water Fountain, 125 Ounces

Don’t forget about your feline friends! Keep your cat’s water supply fresh and cool without constantly changing out the water.  The Petmate 24572 UV Light Infinity Cat Water Fountain uses a pumpless water lift system to quietly keep air circulating through the two-part filtration system. A charcoal filter removes debris, impurities, and odors. Meanwhile, a UV germicidal light destroys harmful bacteria and waterborne pathogens. You’ll be sure your cat’s drinking water is just as clean as the water you drink. Because the water is constantly re-circulating, the water stays cools and oxygenated, encouraging your cat to drink more and promote their health and well-being. The fountain’s filters keep the water and bowl clean to minimize maintenance. It will leave your cat saying “me-wow”!

  • Charcoal filter and UV germicidal light keep water clean and bacteria-free
  • Pumpless water lift system makes for quiet, yet efficient water flow
  • Naturally cools water to provide extra refreshment for your cat
  • Simple to clean and maintain

This product is also available in 180 ounces, sold separately.

Control Your Steam Generator with a Handheld, Wireless Remote

Mr Steam Steam Genie Wireless Control
Keep the controls of your steamroom at your fingertips with the Steam Genie. Compatible with all Mr Steam generators, this handheld remote lets you activate or deactivate the steam flow with the press of a button, from anywhere in the house. Connect the Steam Genie onto the included lanyard for easy portability.

The Steam Genie is designed to be used both inside and outside the steamroom. LED indicators on the Steam Genie keep you updated on the generator’s status. The Steam Genie is powered by a CR2032 battery, included.

  • Preheat your steamroom from anywhere in the house via long-range radio frequency signals
  • Can be used inside or outside the steamroom
  • Compatible with all Mr Steam E-series steam generators
  • FCC compliant for USA and Canada