Leviton’s D3206-2LW is a Multizone Controller and Dimmer system designed for those looking for an advanced, high-end residential device that can dim up to six zones all from one panel. The D3206-2LW can operate in two different ways: As a self-contained dimmer that can dim lights wired directly to the unit or as a control unit attached to the Leviton Control Network communication bus. Using “wizard” menus and pushbuttons to help guide you through settings and adjustments, the D3206-2LW will cater to multiple customizations and features an intelligent infrared receiver which can be used with a remote control. This controller can work with a vast D3200 dimming system or be used as a simple dimmer attached to six zones.
It only takes a few minutes to customize the D3206-2LW, allow it to cater to your specific zone and scene naming schemes. When selecting a specific zone the integrated LCD will display the name of the scene, and the current date and time. This same LCD display will also show the zone’s corresponding light level, making adjustment easy and allowing for simple repetitive settings to be inputted. Enabling a zone local to the D3206-2LW causes the LED status lights to activate displaying the number assigned to the specific zone as well as the selected zone’s brightness level. An auxiliary status indicator (“A”) will also light up when a zone is controlling an auxiliary device wired to the LCnet, but not directly to the D3206-2LW. There are up to eight scene buttons, with the selected and enabled scene button remaining lit. Once scenes have been programmed, any zone of your choice can be adjusted individually and separate from the enabled scene. Available push buttons provide a group dim, group brighten, maximum brightness, and an off switch.