Remotely Switch and Distribute Three Separate HDMI Inputs to One HDMI Output

Sewell SW-28818 3x1 HDMI Switch with IR Remote (HDMI 1.3b Compliant)

The Sewell SW-28818 3×1 HDMI Switch with IR Remote allows you to connect High Definition 1080p source components such as a Blu-ray Player, Play Station 3, audio/video receiver, cable or satellite receiver and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI Selector Switch inputs. Connect the HDMI output from the Selector Switch to an HDTV or other high-definition displays. Be sure to use a quality HDMI Cable to connect all of your HD components to this switcher. This switch is operated off of the power provided in the HDMI signal and requires no additional power supply. By use of the included IR remote control or the manual push button, you are able to switch between devices with ease.

Read more

One thought on “Remotely Switch and Distribute Three Separate HDMI Inputs to One HDMI Output

  1. An HDMI source this kind of as a Blu-ray player may demand HDCP-compliance of the show, and refuse to output HDCP-protected written content to a non-compliant display. A further complication is that there is a compact amount of display tools, such as some high-finish home theater projectors, developed with HDMI inputs but not HDCP-compliant.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s