The TrickleStar 300SW-US-W Z-Wave USB Stick allows control and monitoring of Z-Wave enabled products from a USB port device such as a Gateway, Set Top Box or a PC. The Z-Wave USB Stick can be used with a wide range of PC and Apple Mac Home Control software available on the market. The USB stick includes a USB extender cable to allow the product to be remotely mounted to improve radio frequency (RF) performance.
The TrickleStar USB Stick is a Z-Wave enabled device and is compatible with Z-Wave enabled devices from a range of manufacturers. Each device in a Z-Wave network is designed to act as a repeater. Repeaters can re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots.The Z-Wave USB Stick is designed to be used with a range of other Z-Wave compliant devices such as dimmers, drape controllers and motorized screens. The product is simple yet supports a range of Z-Wave network functionality. The product includes a USB extender cable to allow the product to be remotely mounted to improve RF performance.
Z-Wave is an interoperable two way RF mesh networking technology. Each main powered device in a Z-Wave network is designed to act as a repeater. Repeaters can re-transmit the RF signal to ensure that the signal is received by its intended destination by routing the signal around obstacles and radio dead spots. Read more
Recent research shows that indoor air is often 2 to 5 times more polluted than outdoor air, which is why you should keep the air in your home as healthy and clean as possible. Your baby might not be getting a good night’s sleep because of the pollutants in the air she breathes. The high-performance Austin Allergy Machine Jr Air Purifier not only removes particulate matter like smoke, dust mites, pet dander, mold spores, germs, viruses, and pollen, it will even remove volatile organic compounds (VOCs) that come from such sources as cleaning solutions, carpets, paints, building materials and formaldehyde. Four stages of filtration ensure you are breathing clean air: First is a “large-particle” pre-filter to trap dust, hair, and pet dander; this filter is designed to be vacuumed rather than replaced. Second is a “medium-particle” pre-filter which traps mold, spores, and pollen. The third line of defense is 30 sq ft of medical-grade true HEPA filtration, which removes micro-organisms like bacteria and viruses. Finally, 6.5 pounds of military-grade activated carbon removes chemicals, gasses, and odors. Most air filters sold in stores do not remove gaseous VOCs, and the electrostatic cleaners emit harmful ozone. The machine has four casters for easy mobility, making it easy to move from room to room so your baby can breathe clean air. Read more
Coleman Cable’s Mini X-Treme Box provides more compact and less costly work-site power distribution than other full size models. Used along with our restoration adapters, these units are ideal for disaster restoration work where the only available power is from range outlets, dryer outlets, or portable generators. They can be used in any situation where a more compact, easier-to-handle unit is desired to safely expand and distribute power on jobsites.
30Amp, 125/250 Volt Generator and dry outlets, and 50-amp 125/250-volt range outlets can now be converted to a GFCI/Breaker protected power distribution unit providing standard usable 125-volt power. the Mini X-Treme box offers a NEMA type-1 Enclosure with 4 NEMA 5-20R 20-Amp, Circuit breaker and GFCI protected outlets on the front, and the same 4 on the back.
It features: OSHA and NEC Compliant, C(ETL)US Listed, and certified to CAN/CSA. Reduces electrical hookup and labor time while on the job. 8 overload-protected outlets use GFCI and circuit-breakers. All Outlets GFCI protected with open neutral and over-voltage protection. Compact size for ease of use and may be used in vertical or horizontal positions.
- Turns your L14-30P generator/dryer/range outlet into 8 regular (5-20R) outlets
- Reduces electrical hookup and labor time
- 8 overload, circuit breaker protected 20 amp straight blade outlets
- Compact size allows for use in vertical and horizontal positions
- Mini 10-pound unit is less than half the weight of normal power distribution boxes
Watching DVDs or recorded shows on your DVR has never been easier than it has with the Weemote dV. Only the most frequently-used controls are featured on this compact remote. The remote only has nine large buttons to play, stop, or pause the content, as well as navigational direction, selection, and menu or simple and error-free operation. Children and elderly users can browse through interactive content without frustration or parental assistance.
Setting up the Weemote dV is extremely easy. Simply install two AAA batteries, sold separately, and program in the code compatible with your device. The Weemote dV includes a complete library of setup code and is designed to work with virtually any brand of DVD player on the market. An advanced learning function allows you to program additional user controls and add controls for devices not supported in the included code library, such as a TiVo system. The programming buttons stay hidden until you remove the screw and cover, protecting your settings and making for a cleaner display. The battery cover also screws in to keep the batteries secure. All settings are stored in non-volatile memory so you won’t los any programmed features when the batteries are removed. With a compact design and soft rubber around the edges, this remote is more ergonomic than traditional remote. A flat, contoured bottom also gives added stability to let the remote be used on a tabletop. Read more
You’ll save time by locating the wires in less than two minutes and save money by eliminating the chances for costly mistakes when cutting through drywall. Xspot and Xspot-minis include strong magnets and enable you to place the wires exactly where you think you’ll need them later. Mounting devices, such as the Xstrap and Xbox ensure your wires stay put until you are ready to access them. To find your wires from the other side of the drywall, use the Xtreme locator tool. Its reverse polarity detects metal on one side, making it useful for finding studs as well. Flip the Xtreme over and it should push away when it detects another magnet so you can be sure you have found an Xspot and not just another metal object. The Xcentric tool allows you to mark an “X” on your wall, so you’ll know exactly where you need to drill the appropriate sized hole. Xbooty bags are also included and can be slipped over the locator tools to prevent scratches on your painted and finished walls. Learn more