WallWizard ZA52 Motorized Swivel Stand for Flat Panel TVs, 32″ – 52″
Item# 43228
Price: Normally $399.99 Hot Deal $229.98
The WallWizard ZA52 Motorized Swivel Stand for Flat Panel TVs is a unique alternative to placing a flat panel TV on a table. Whether you need to rotate the TV to eliminate glare or just want to be able to see the
TV from another seating position in the room, you can do all this at the touch of a button. Its sturdy design offers 60° of swivel motion left or right, eliminating flat-panel viewing problems such as glare and reflections, including inaccurate color and loss of picture detail. The ZA52 has a built-in learnable IR receiver to learn the signals from your own remote control to adjust your TV, so you can fine-tune your viewing experience every time. With the optional ControlWand (Wi-Fi adapter – sold separately) a hand held device such as an iPhone can be used to control the mount via auto, manual, and gyro modes. In the gyro mode, the motion of the mount is synchronized with the motion of the hand held device without having to push a button.
Fits Most: 32″- 52″ Flat Panel TVs up to 100 pounds
Flexible 60 degree swivel range both directions, left or right
Quiet and smooth operation
Remote Controllable with built-in learnable IR receiver
VESA Compatibility: 100mm x 100mm, 200mm x 100mm, 200mm x 200mm, 400mm x 400mm, 600mm x 400mm
Read more *Since we strive to provide you with the lowest prices, prices are subject to change.
Mini Gadgets Inc. KL-USB Key Logger for USB Keyboards
Item# 96387
Price: Normally $169.00 Hot Deal $92.94
These days there are a wide variety of key logger solutions available. Many of them are moving to more high-tech means such as flash drives or software, but it is usually the simplest methods that work best. With this hardware key logger all you need to do is connect the keyboard to the key logger and then plug it into your PC’s USB port. Any keys pressed from then on are recorded automatically with no need to install any software and best of all its undetectable! Recovery of the data is a breeze – simply open notepad and type in your password and then your results are one key press away.
Over time, your dryer vent fills with lint that sneaks by your dryer’s filter, which makes your dryer work harder to dry your clothes. You can save $$ every month on your dryer bills if you keep your vent system free of lint. The system generally pays for itself in the cost savings after the first use. In addition, it will help avoid the fires that can occur when lint buildup blocks the flow of air, causing excessive heat buildup by keeping your dryer vent clear with the LintEater™. Designed by a leading manufacturer of professional duct-cleaning equipment, the LintEater Dryer Vent Cleaning System effectively removes dangerous lint build-up in almost every type of dryer vent system, and it’s easy to use with a shop vac or cordless drill (sold separately) or even your dryer’s air.
The LintEater Dryer Vent Cleaning System comes with a variety of brushes, extension rods and adapters to clear your ducts thoroughly, regardless of whether you have a metal, foil or white vinyl dryer vent. The rotating action of the auger brush and flexible rods will traverse the multiple turns that are common in most vent systems. The included adapters allow you to use the air from your dryer or a shop vacuum/blower to remove the lint from the vent completely while rotary brushing.
Save $$ on your heater electric or gas bill every month
Vent cleaning system eliminates excess lint
System works with metal, foil and white vinyl dryer vents
Read what our customers say about their savings!
Average Customer Rating 4.5 Stars (127 customer ratings)
Bill — Joplin MO Date: 12/30/2010
Review: I don’t know how you could mess up with this product. I was skeptical, but it removed about 3 1/2 gallons of lint i know disgusting in 22 foot dryer vent/duct system. I found a product that saved me money and time. I thought it was my dryer I did replace my dryers thermal fuse but it was my clogged vent causing my dryer to burn up it’s fuse.
RICHARD — SCHENECTADY, NY Date: 10/14/2010
Review: How handy is this tool? Worked like a charm and got the lint out real quick…Now part of my toolbox.
JOANNE — EARLYSVILLE, VA Date: 8/19/2010
Review: truly amazing – easy to assemble – incredible results – I would highly recommend this vent cleaning system. *Since we strive to provide you with the lowest prices, prices are subject to change.
IR to RF to IR Remote Control Range Extender Kit, 418 MHz
Item# 80430
Price: Normally $64.95 Hot Deal $49.99
Infrared (IR) remote controls have limited range and generally only work in the same room as the audio/video (A/V) component it controls as line of site is needed for communication to occur. The IR to RF to IR Remote Control Range Extender Kit, uses an internal transmitter that converts your remote’s IR signal into a radio frequency (RF) signal, giving you the ability to control your components up to 100 feet away, through walls, floors, doors and windows. Simply slide one of the rechargeable batteries into the transmitter and switch that out with a battery in your remote control; it works with remotes using AA or AAA batteries (AA sleeve adapter included). When the remote control is used, the IR signal is converted to RF and is sent to a small, AC-powered receiver (RF base station), which is placed facing the components you wish to control. The receiver then converts the signals back to IR and sends them to your components, all in a fraction of a second. Ideal for home theater setups that have components behind closed doors, you have the freedom to move throughout your home and control components that are out of sight. This device operates on a 418 MHz RF frequency; it is also available in a 433 MHz RF Frequency.
Important Note: This kit is NOT COMPATIBLE with remote controls using built-in rechargeable battery packs.
Control A/V components up to 100 feet away through walls, floors, doors and windows
Increase the functionality of your Venstar thermostat by adding Venstar Indoor/Outdoor Remote Temperature Sensor. This sensor allows you to monitor the temperature in an additional spot on your property. It can be mounted on the interior or exterior of your home for an accurate temperature reading. It can be used to report the outdoor temperature when using a compatible residential thermostat, report the temperature of a room, or to report the temperature in a space that is different from where a compatible thermostat is located. The sensor receives power and communicates via a Cat. 5 cable connection, sold separately. The sensor will work with Venstar 1-Day Programmable Digital Thermostat, 7-day Programmable Digital Thermostat and 7-Day Programmable Thermostat, Dual Fuel. The Venstar Indoor/Outdoor Remote Temperature Sensor measures indoor or outdoor air temperature with a range of -40° F to 127° F. When used outdoor, the wired sensor allows the outdoor air temperature to be sent to the thermostat and display the high and low outdoor air readouts for the day. When used as an indoor remote room sensor, it will sense room temperature where it is installed and show a blinking degree icon next to the temperature display on the thermostat.
Sensor used to transmit temperature to a compatible Venstar thermostat via Cat. 5 connection