NATALE — NORTH BELLMORE, NY Date: 7/19/2010
Review: Once I followed the instructions the garage control worked as described. Linked with a lamp module I can now see if the garage door is open without getting up and going outside.
TIMOTHY — JACKSONVILLE, FL Date: 7/8/2010
Review: Works well. Just as expected. Easy install.
MICHAEL — WALNUT CREEK, CA Date: 4/7/2010
Review: Worked great! MUCH better than the TriggerLinc I was using. Should have an option for using a 4xI/O link instead on a 1x.
ADRIAN — CERRITOS, CA Date: 3/6/2010
Review: I chose to mount the switch on the header above the garage door instead of on the floor. The magnet was mounted on the top edge of the door and comes within a 1/2″ of the switch. This easily triggers the switch. In this location, this made it easy to run the wires along the top of the garage opener track. With I/OLinc’s always on outlet, it was simple to just unplug the opener, plug in I/OLinc, and then plug the opener into I/OLinc. This made wire runs so short that only one of the two supplied wire bundles was necessary. Oh, and so far, operation is flawless.