Archive

Posts Tagged ‘Water Leak Detection’

Water Defense Alarm Emits Audible Alert when Cable Detects Water

July 2, 2012 Leave a comment

Protect your home from water damage before it happens with Water Defense Water Alarm from Honeywell. The Water Alarm comes with a 4 foot long water sensing cable which is able to detect water along the entire length of the cable. If the cable detects water it will instantly emit an audible alarm to alert those around that there is a leak in the appliance(s) it is setup to monitor. An added feature with the Water Defense Water Alarm is that it is an expandable system. While it comes with a 4 foot long cable it is not limited to this if you want to use it to monitor a larger area. Water sensing cable extensions for this system can be added making it expandable up to 250 feet, expandable cable sold separately. The Water Alarm will also provide peace of mind when setup in areas that are not frequently observed such as water heaters and basement perimeters which could potentially go unnoticed for a time if a small leak were to start. The Water Defense Water Alarm base unit is powered by a 9V battery, sold separately, and the unit will emit an audible chirp to alert when the battery needs to be replaced.

Read more

Add More Modules to Your Whole Home FloodStop System for Maximum Protection

April 25, 2012 Leave a comment

Onsite Pro XSM Extra Wireless Sensor Module Kit for Whole Home FloodStopThe Onsite Pro XSM Wireless Sensor Module Kit adds an extra level of security to your FloodStop system. The kit is compatible with the Whole Home Wireless FloodStop with 3/4 Inch Valve, 1 Inch Valve and 1 1/4 Inch Valve. You can add up to 31 modules to each Whole Home Wireless FloodStop System giving you the flexibility to protect every location where water damage can occur. These units are very easy to pair or sync to the FloodStop system, and takes only 1 minute to add.

The XSM Wireless Sensors Modules can be powered by four AA Batteries, (sold separately) or plug them in with the included wall adaptors. Note: If the sensors are plugged into AC, they also act as a signal repeater. Imagine, the more sensors you have the better the signal strength.

Read more

Stop Sink Basin Leaks From Becoming a Disaster!

April 11, 2012 Leave a comment

Onsite Pro FS3/8CD Sink (Hot and Cold) FloodStop with 3/8 Inch Compression ValvesPrevent water damage from leaking sinks, basins, or any other items that use 3/8″ Compression fittings. This unit will detect a leak, sound an alarm, and automatically turn off the water supply to the offending appliance or pipe to prevent further damage. This unit can be easily installed in about 10 minutes.

Your sink may be a disaster waiting to happen unless you have protection. FloodStop protects your home 24 hours a day everyday. FloodStop automatically shuts off the water supply to the Sink, whether caused by a ruptured supply line, leaking garbage disposal or an overflow. Incorporate the Flood Stop into your INSTEON or X10 network – the control unit has two NC outputs and plugs with 6″ leads.

Features:

  • The FloodStop valves are connected directly to the angle stops and supply lines
  • Sensors are placed at the base of the fixture
  • Valves stay open until water loss is detected
  • Water on sensor closes FloodStop valves and sounds alarm
  • Valves stays closed until problem is attended to and system reset

Read more

Stop Water Leaks Throughout Your Home From Becoming a Disaster!

April 9, 2012 Leave a comment

Onsite Pro FS1NPTW Whole Home Wireless FloodStop with 1 Inch Valve

 

 

The Onsite Pro FS1NPTW is a Wireless FloodStop system for your entire home. Enjoy the satisfaction of knowing that if any appliances, supply lines or drains start to leak, your FloodStop system will automatically shut off the water to the entire home. This system comes with everything you need including a full-port, solid brass motorized ball valve, FloodStop controller and four wireless water sensors. The sensors can be powered by four AA Batteries, (sold separately) or plug them in with the included wall adaptors. Note: If the sensors are plugged into AC, they also act as a signal repeater. Imagine, the more sensors you have the better the signal strength. The Floodstop monitor unit is powered by the included AC adapter or four C Batteries, (sold separately). Incorporate the Flood Stop into your INSTEON or X10 network – the control unit has two NC outputs and plugs with 6″ leads.

Don’t risk your floors, carpets and other personal belongings to costly and ruinous water damage! Prevent flood damage and avoid costly repairs with the easy-to-install whole house auto-shutoff valve. This system not only detects leaks early, but it automatically shuts your water off in the event of a leak, alerting you with the control panel’s alarm. You can also customize your whole home system with additional Wireless Sensor Modules and Wireless Sensor Pads each sold separately.

This whole home shutoff system is made for 1″ valves. A whole home FloodStop shutoff system is also available for 3/4″ and 1 1/4″ valves, each sold separately. Read More

Follow

Get every new post delivered to your Inbox.

Join 96 other followers

%d bloggers like this: