Posts Tagged ‘Smart Plumbing’

Combine a Fixed and Handheld Showerhead to Your Shower

March 12, 2012 Leave a comment

Magic Showerhead WD1 Showerhead Water Diverter

  • Fits any half inch shower pipe
  • Simple installation, usually requires no tools
  • Attractive Chrome Finish

The Magic Showerhead Water Diverter allows you to install a fixed shower head and a hand held shower head at the same time. You can switch between both shower heads or run both at the same time. You can use this diverter with two different Magic Showerheads with LED to give your shower a complete customized look and feel. Read more

Water-Powered LED Showerhead Creates a Spa-Like Experience in Your Shower

March 9, 2012 Leave a comment

Magic Showerhead SH2014NB Handheld Black Showerhead with Pink/Purple LED Lights



  • No batteries or electricity needed
  • LED lights are powered solely by the water pressure
  • Fits any standard 1/2″ shower pipe
  • Easy to install and even easier to clean



With a Pink/Purple LED you can rejuvenate yourself and let out your girlie side. On an average, Americans spend thirty minutes in their bathrooms every day. The Memowell Handheld Magic Showerhead brings a new level of fun and relaxation into the shower, providing the bathroom with a spa-like environment. The Showerhead does not use batteries or electricity to function. It uses water pressure only to create the illuminating experience – making it an environment friendly product! It’s easy and simple to install, just unscrew your current showerhead and replace it with the attractive handheld Magic Showerhead in seconds. With the MagicFlow Technology the water consumption does not exceed 2.5 Gallon/min at 80psi. Read More

Save over 80% of the water from your sink

March 7, 2012 Leave a comment

TheOne2tap is the one touch faucet that is the easiest way to begin conserving water. With practical uses for children, the disabled, and the elderly is perfect for homes, recreational vehicles, boats, hospitals, and nursing homes. Eliminate the potential for leaky faucets and avoid costly water bills with this hygienic and easy-to-use faucet. Installing One2tap is simple and fits most standard faucets – no need for a plumber or special tools. Start conserving water (and thus saving money and the planet) today by using this smart faucet. Water conservation is the most cost-effective and environmentally sound way to keep up with and reduce our demand for fresh water. By conserving water we can reduce the pressure on our lakes, reservoirs and sewage treatment facilities and serve more people. Water conservation also saves energy and reduces carbon emissions, which helps in the effort to stop global warming. It is estimated that leaving the hot water running for just five minutes is the energy equivalent to using a 60W light bulb for fourteen hours.
Read more

Easy-to-Install Automatic Water Faucet Turns on When it Senses Your Hands

February 29, 2012 Leave a comment

EZ Faucet



  • Help prevent the spreading of infection with a touch-free hands-washing system
  • Infrared sensor turns your water on when you place your hands in your sink
  • Simple two-step, five-minute faucet installation
  • Conserve water by running the drip-free faucet only when actually needed



Turn your existing faucet into a touch-free system for safe, germ-free hand washing. Most automatic faucets cost hundreds of dollars, but you can enjoy this existing technology in your own home with an inexpensive do-it-yourself device that installs easily in just five minutes. The EZ Faucet™ has a built-in infrared sensor that turns your water on automatically when you put your hands in front of it, making it easy to use for children, seniors, or just busy people whose hands are full or dirty. The EZ Faucet is powered by four AAA batteries (sold separately), which will last about 1.5 years.   Read More

Constantly monitor for accumulating moisture

February 25, 2012 Leave a comment

DynaQuip Controls WCLS 3/4 WaterCop LeakStop Single Point Detection and Automatic Shut-Off, 3/4-InchDynaQuip Controls, maker of the WaterCop and proven leader in household leak protection, has developed a new way to prevent floods and other water damage in your home. DynaQuip’s new WaterCop LeakStop System will detect water leaks and moisture accumulation at a single location and will automatically shut off the water supply to prevent extensive water damage from destroying your home. The WaterCop LeakStop system is designed for a plumbing supply line installation. This should be upstream of the appliance or area you wish to monitor. Place the two sensor probes in an area most likely to be reached by accumulating water if a leak were to occur, most commonly from a water heater. This system is ideal for water heaters which are known for being vulnerable to leaks as they become older. According to the U.S. Department of Energy, It is a fact that nearly 8-million homeowners will replace failing water heaters each year.

The LeakStop system will constantly monitor the user selected areas for moisture and close the valve as soon as moisture is detected. The valve can be manually opened and closed independent of leaks by pushing the open and close soft touch buttons located on the front of the actuator. A brass ball valve is used to prevent clogging within the valve. Two moisture sensors are attached to the electrical control box for placing around the area or appliance you would like to monitor. When activated, this valve will stay closed until it has been manually reset. Available in a variety of different sizes, these systems pay for themselves after the first activation. Read more


Get every new post delivered to your Inbox.

Join 97 other followers

%d bloggers like this: