- Trigger X10 devices based on temperature
- Designed to be submerged in water up to 5 feet
- Sensor connects to an X10 Powerflash Interface (sold separately)
- Set a specific temperature to activate X10 controlled devices
The X10 Variable Temperature Sensor provides a way to sense temperatures and trigger X10 devices based on user settings. It interfaces to a standard X10 Powerflash Interface, sold separately, and supports a temperature range from approximately 25° F – 106° F.
The sensor is completely self contained and uses a sealed solid state transducer preset at the factory. The sensor should be placed in a location that will protect it from being frozen in ice and from direct sun, as well as no deeper than 5′ in water (to accurately reflect the ambient temperature). The control unit (with the temperature adjust potentiometer) must be protected from the elements. Depending on your application, the user selection of leads determines turning on or off devices based on whether the temperature is hotter than the set value or cooler than the set value. The user selects two leads (based on the table included), sets the approximate temperature using a small screwdriver, connects the sensor to the Powerflash terminals, plugs in the wall transformer, and places the sensor in the appropriate location. Read More
Like this:
Be the first to like this post.
- Real-time tracking & reporting
- User-defined “fence”
- Low voltage alert
- Battery monitor alert
- Bilge water alert
- Emergency alert
- 1-month backup battery
- Waterproof
- GPS jamming alert with cell tower triangulation
It would be great to hop on your boat and head out for a relaxing day on the water or weekend exploring a new port, but what if someone else had the same idea – take your boat out for a tour? Unfortunately, in today’s world, you can’t always count on your boat staying where you left it. The Guard Dog MarineTrac will protect your investment and let you know if something goes wrong. You can set up a virtual fence around its normal mooring spot, so if it moves beyond that area you will receive an alert message. It will transmit its present GPS coordinates, as well as three month’s worth of bread crumbs showing where it went. Tie it into your bilge pump circuit to be notified of bilge pump use. It keeps track of engine run time as well as battery voltage and system current draw, and can let you know of problems. A built-in backup battery will support MarineTrac for a month if your boat’s power goes out. Supports iPhone, Android, and BlackBerry smartphones. Many insurance companies will offer discounts based on a Guard Dog installation. Read More
Like this:
Be the first to like this post.
It would be great to hop on your motorcycle or ATV and head out for a relaxing day or weekend, but what if someone else had the same idea – take your bike out for a ride? Unfortunately, in today’s world, you can’t always count on your bike staying where you left it. The Guard Dog MotoTrac will protect your investment and let you know if something goes wrong. You can set up a virtual fence around its normal parking spot, so if it moves beyond that area you will receive an alert message. It will transmit its present GPS coordinates, as well as three month’s worth of bread crumbs showing where it went. It keeps track of engine run time as well as battery voltage and system current draw, and can let you know of problems. A built-in backup battery will support MotoTrac for a month if the main battery power goes out. Supports iPhone, Android, and BlackBerry smartphones. Many insurance companies will offer discounts based on a Guard Dog installation.
Read more
Like this:
Be the first to like this post.
It would be great to hop in your car or truck and head out for the day’s errands or weekend getaway, but what if someone else had the same idea – take your vehicle out for a drive? Unfortunately, in today’s world, you can’t always count on your car staying where you left it. The Guard Dog AutoTrac will protect your investment and let you know if something goes wrong. You can set up a virtual fence around its normal parking spot, so if it moves beyond that area you will receive an alert message. It will transmit its present GPS coordinates, as well as three month’s worth of bread crumbs showing where it went. It keeps track of engine run time as well as battery voltage and system current draw, and can let you know of problems. A built-in backup battery will support AutoTrac for a month if your car’s power goes out. Supports iPhone, Android, and BlackBerry smartphones. Many insurance companies will offer discounts based on a Guard Dog installation. Read More
Like this:
Be the first to like this post.
- Trigger devices based on high or low humidity level (set by user)
- Self-contained unit
- Uses a sold state transducer
- Great for keeping your home comfortable and safe
The X10 Humidity Sensor/Controller provides a way to sense humidity levels and trigger X10 devices based on user settings. It interfaces to a standard X10 Powerflash device (sold separately). The sensor is completely self contained and uses a solid state transducer preset at the factory, with the trigger point adjustable between 15% to 85%. There are three leads extending from the sensor. Depending on your application, the user selection of leads determines turning on or off devices based on whether to trigger when the humidity is higher or lower than your preset value. The user selects two leads, sets the approximate humidity level using a small screwdriver, connects the sensor to the Powerflash terminals, plugs in the wall transformer, and places the sensor in the appropriate location. Read more
Like this:
Be the first to like this post.
