Take advantage of the cool, yet still sunny days! Heat up your spa or jacuzzi with the energy of the sun to enjoy on those colder days and nights. The Solar Spa Cover™ is a passive solar spa heating device made from two sheets of heavyweight UV resistant vinyl. The upper clear layer holds insulating air and focuses sunlight on the blue colored lower layer. The blue layer absorbs about 50% of the sunlight and converts it to heat. The balance of the sunlight is allowed to pass through for deeper water heating. At night the contained air acts as an insulating blanket to retain heat gained during daylight as well as retaining the heat from your heater. Solar Spa Covers are equipped with six magnets to improve the clarity and decrease hardness of the water in your spa.
- Solar heating of spa water during the day
- Thermal blanket effect to retain heat in water at night
- Water anchor adds stability and weight for high wind areas
- Reduces evaporation of water and chemicals
- Redesigned inner grid with added drainage grommets which allows water to seep through
- Redesigned and enlarged outer ring for better floating, rafting and rigidity
- Added grommet on the hanging hoop for increased durability
- Compatible with automatic pool cleaners
- Easy to install and remove by one person
- Unaffected by salt or chlorine systems
- Recommended by pool professionals
- Easy to clean
The Solar Spa Cover is especially designed with thick vinyl and large air chambers to sustain itself over the varying temperatures commonly found in spas. This design is also intended to withstand the jets from most spas in order to avoid swamping or sinking. The Solar Spa Cover is designed around the dimensions of most spas for the best fit possible. The Solar Spa Cover may be used on all chlorine or salt water systems spas whether in ground or above ground. Read more
The Twister from Solar Sun Rings is a new and revolutionary accessory that allows for your pool cleaner to take a random and thorough cleaning pattern throughout your swimming pool floor. It’s power steering for your pool cleaner. TWISTER is an Above Ground Pool Cleaner accessory made of corrosion and impact resistant materials. It is designed to operate only with suction side cleaners and has a gear box with a set of gears, sprockets, and shafts which is powered by the water suction from your pool pump. This suction enables the front face of TWISTER to rotate and counter rotate about 3 times an hour.
The Midwest Canvas Corp. 16 x 32 foot rectangle solar blanket helps you to extend your swimming season and cut energy costs by reducing your reliance on gas pool heaters. This solar cover gradually raises the pool water temperature by absorbing sunlight during the day and retaining the extra heat during the night. The 16 x 32 foot rectangle pool solar has a 12-mil thickness for extra durability and long life.
By day, you trap free heating energy from the sun when the pool is not in use, to heat the water without heating costs. At night, using this Solar Cover will minimize heat loss into the cooler air. And you can expect to significantly lower your pool’s chemical use, due to reduced evaporation when the cover is on your pool. Constructed from durable, heavy-duty materials, pool covers from Midwest Canvas allow you to make use of free heat from the sun for many seasons to come. By aiding heat transference and by acting as an insulator, this cover will raise the temperature of your pool during the day while reducing night time heat loss.
- Uses free heat from the sun to heat your pool during the day
- Reduces heat loss during the night
- Reduces chemical evaporation from your pool
- Can be trimmed with conventional scissors to fit practically any pool size
- Constructed from heavy-duty 12-mil material for excellent durability
On a sunny day, use of solar panels can raise the water temperature by 10° F to 15°F sometimes more—without burning fossil fuels or contributing to air pollution, increasing your opportunities to use the pool earlier and later in the year than when it is unheated, especially when a solar cover is used.
Solar heating panels for above-ground pools are lightweight and easy to install and cost nothing to operate – the sun does it all. No ladder or climbing up to the roof required. The panels can be installed close to the ground with simple hand tools, and taken apart for storage the same way. Complete instructions along with parts you need to install and operate the solar heater are provided with the kit. Panel sections are usually 20 feet long and 2 feet wide and made of UV resistant materials for long-lasting service.
With this system; used by thousands of Americans—you’ll save money on fuel and electricity bills, extend your swimming season by weeks, and get more enjoyment from your pool than ever before! Solar heating panels captures free renewable energy from the sun to heat your pool, reduce your water heating bill and reduce the amount of electricity you use. The sun’s heat is transferred to the water as it flows through tubing on the solar panels via your existing pool pump; where it is heated by the sun and returned to your pool. Free heat for your Above-Ground Pool! Bring your pool to life with a 4x20ft. Above Ground Solar Pool Heater and get the most out of your pool. Swim in warmer water all season for only a small investment. FREE solar heat will keep you comfortable all season long. With this solar heating system, you’ll swim earlier and swim longer – with FREE heating energy from the sun, and without complicated, high-maintenance pool equipment.
• Raise your water temperature 10° to 15° without costly fuel bills
• System heats water and transfers it to your pool
• Do-it-yourself instructions and connecting hardware included
• Environmentally friendly – no burning of fossil fuels
• 2 X 20 Ft Polypropylene Solar Collectors
• 2 Elbows/Hose-Connector Adapters
• 2 End Caps
• Connector Hose for Second Collector
• 2 Stainless Steel Clamps
• 1 Roll Teflon Tape
Turn your ordinary above-ground swimming pool into an extraordinary nighttime oasis with the Nitelighter. This pool light for hard-walled above-ground pools resides under water, illuminating your entire pool with a single UV-coated 50-watt long-life halogen bulb, so you’ll be able to swim after dark or entertain by the pool all evening long.
• Mountable pool light
• 28-foot cord and power adapter
• Mounting materials and instructions
More InfoInstallation is easy and requires no drilling or draining, since the Nitelighter for Above Ground Pools has a mounting bracket that mounts securely over the wall under the top rail, with a second bracket around the return. The Nitelighter is equipped with an outdoor-rated 12-volt transformer with a 28-foot cord to reach the nearest 110-volt outlet. The Nitelighter’s patented reflector design is engineered for maximum illumination, and the unit also features a chemical-resistant lens. The Nitelighter will not interfere with your pool’s water inlet.
Versatile with hassle-free installation, this pool fountain is a quick and simple way to add elegance to your backyard or pool area. Its installation requires no tools with a 1 ½” threading with lock-ring to fit the most standard inlets. Two adapters are also included to use with some non-standard-sized inlet threads.
This two-tiered fountain can be installed in minutes and is easily adjustable. Choose from two 20-jet spray patterns. Spray height can be adjusted from 15 feet high to a soothing trickle. A rotating ball valve lets you adjust the spray direction – water can flow up, out, or even underwater. The fountain’s nozzle is shaped like a flower for added elegance. Adding this fountain to your pool not only adds ambience, but the aeration process can also keep the water a few degrees cooler.
• Wall-mounted fountain
• Can be used for both in or above-ground pools
• Spray height is adjustable from a trickle to 15 feet high
• Rotating ball valve allows you to spray water up, out or even underwater
• Includes adapters to fit most inlets
1x – Fountain base
1x – Fountain stem
1x – Slip eyeball adapter
1x – Large eyeball adapter
4x – Plastic restrictor plugs
1x – Instruction sheet
The Marpac 128 Poolkeeper Pool Water Level Monitor and Filler automatically maintains swimming pool water at preset level that you choose. Simply attach the Poolkeeper to a good grade garden house and make two simple connections. The unit uses water pressure for operation so no electrical wiring or professional installation is required. Once the garden hose is connected, place the unit poolside, set your water level and turn on the water. No “ballast” is needed. By maintaining a consistent water level, you will also protect your pool pump or motor from failing which is caused when there is a lack of water flow. Read more