Archive

Posts Tagged ‘Keypads & Touchscreens’

Dim CFL and LED Lights With Ease

September 3, 2011 Leave a comment

Energy-saving compact fluorescent lamp (CFL) and LED bulbs are quickly becoming standard in most homes. However, standard dimmers may not deliver the most reliable performance with CFL and LED bulbs. Lamps may “drop out” or turn off before the dimmer has reached the lowest setting. Voltage fluctuations within low light levels can also cause dimmers to turn the lamps off.Lutron DVWCL-153PH-AL Diva Dimmable CFL/LED Dimmer Switch with Wallplate - Almond
This new Diva Dimmer Switch eliminates all the usual issues one might encounter when using a standard switch to dim a CFL or LED bulb. Its integrated HED technology features advanced dimming circuitry that makes it compatible with most high-efficiency light bulbs. With this dimmer switch installed, you’ll be able to adjust light levels just as you would with a regular light bulb. For added convenience, traditional incandescent and halogen bulbs also work seamlessly with this dimmer switch. Because performance can vary from manufacturer to manufacturer, you can use the adjustment dial to set the bottom of the dimming range according to each bulb.

Lights can be turned on and off in an instant by tapping the paddle. The discreet slider gives you the most precise control over how bright or dim you’d like the lights to be. You can even program the light to default to a preferred lighting level when the paddle is used.

This product is also available in ivory and light almond, each sold separately. Read more

Imagine being able to put a wall switch anywhere you like, without running wires or cutting a hole in your wall!

August 19, 2011 Leave a comment

X10 PHW04D-W or RSS18 Wireless 4-Button X10 Wall Switch - White with White Inset

It’s easy with this attractive, super thin, light-weight Wireless X10 Wall Switch that adheres to any surface with its included velcro strips. With easy, single push-button programming, you have wireless remote control of up to 3 X10 compatible modules or X10 receivers on consecutive X10 addresses, plus dimming capability with the fourth button. This attractive Wireless X10 Wall Switch measures only 7 millimeters thick and is white in color. The X10 wall switches use a thin 3-volt lithium battery (included).

Place a Wireless X10 Wall Switch next to your desk and flip on your stereo and overhead lights without getting up from your chair. Mount one in your living room and control the security and decorative lights for your flower garden or landscaping. And if you have a detached garage, shed or greenhouse, you can light a dark interior from the safety of your back porch. You can even use this wireless wall switch as a portable 4-button wireless remote! Read more

Can’t find a wall-mounted switch that meets your exact needs?

August 18, 2011 Leave a comment

No problem! Simply create your own with an X10 controller!
X10 6319-1W XPT1-W Wall Mounted X10 On/Off Controller for 1 Address - White

It’s easy with these customizable wall-mounted controllers. They work just like the tabletop X10 controllers but are permanently mounted in a standard wall switch box and fit standard Decora® wall trim plates. This white Wall-Mounted Controller for One Address features On/Off control. A Decora-Style Wall Plate is required and sold separately.

Setup is a snap: simply connect two wires (Hot and Neutral) from inside the wall box to the two leads coming off the controller. To set the button address, just pop off the keypad, and set the house that the transmitter will controlling. You can even combine units in a multiple wall switchbox to build control panels with custom features.

Since these wall-mounted controllers are primarily transmitters of X10 signals, they do not have the ability to directly control a load. If you are replacing an existing switch (mechanical or X10) with a wall-mounted controller, you will need a X10 receiver to do the switching of the load formerly controlled by the switch. We suggest using Fixture Relay Modules or Plug-In Modules (for locations where the switch controlled an outlet). Read more

Use Absolutely Zero External Power to Save $$ on Energy Bills and Batteries!

July 20, 2011 Leave a comment

With these products you could save money on your energy bills without using any extra power! They don’t even need batteries–they are self-powered and self-charging!

1. The Leviton WSS0S-R0W LevNet Handheld Self-Powered Wireless Remote can control either one light, or even up to two groups of lights
Leviton WSS0S-R0W LevNet Handheld Self-Powered Wireless RemoteThis remote instantly charges itself each time it is pressed, so you won’t need to hassle with complicated wiring or replacement of batteries. It is small enough to fit in the palm of your hand so you can carry it around with you in your pocket as needed. The remote has four buttons that can be programmed to control two or four scenes.

  • Self-powered and self-charging – no need for batteries or other external power supply
  • No complicated or troublesome wiring required
  • Can be used in multi-way circuits

2.The Leviton WSS0S-E0W LevNet Self-Powered 3 x 3 Single Rocker Switch, White is perfect to control your lighting without costing you anything!

Leviton WSS0S-E0W LevNet Self-Powered 3 x 3 Single Rocker Switch, White
This rocker switch instantly charges itself each time it is pressed, so you won’t need to hassle with complicated wiring or replacement of batteries. Because the unit is self-powered, it is virtually maintenance-free and allows for more flexibility in placement. The switch can even be moved from location to location, as needed. An unlimited number of receivers can be controlled from this single switch, as long as the devices are grouped and in radio frequency (RF) range.

This product is also available in black or dual-rocker, each sold separately.

  • Self-powered and self-charging – no need for batteries or other external power supply
  • No complicated or troublesome wiring required
  • Controls one light or group of lights (as long as receivers are within RF range)
  • Can be used in multi-way circuits

Add this Touchscreen to Your HomeTroller to System to Control Everything in Your Home

February 11, 2011 Leave a comment

HomeSeer HST-IW07 In-Wall 7″ Touch Screen

HomeSeer HST-IW07 In-Wall 7

Item# 12674

Price: Normally $699.95
Hot Deal $664.95

Control everything in your home with the new HomeSeer 7″ in-wall touchscreen! This unit is the perfect companion to the HomeTroller Pro Series 3 and HomeTroller Series 3 units. The HST-IW07 is designed for quick and easy “1-cable” PoE installation and will control lighting, thermostats, audio/video equipment, security systems, and irrigation.

  • Controls any device in your HomeSeer System
  • Displays weather conditions and forecasts
  • Monitors network cameras
  • Real-time Status Display of all Devices in Your Home
  • Ouick to install
  • Read more
    *Since we strive to provide you with the lowest prices, prices are subject to change.

    Follow

    Get every new post delivered to your Inbox.

    Join 92 other followers

    %d bloggers like this: