Archive

Posts Tagged ‘Jacks and Trim Plates’

Divert Home Theater Wires to Run Behind Your Walls With This Attractive Wall Plate Insert

March 29, 2012 Leave a comment

PowerBridge HDMI-1-CVS-BK Component/S-Video/HDMI Decora-Style Insert - Black

  • One wall plate allows HDMI, Component and S-Video connections
  • Fits Decora-style wall plates (sold separately)
  • Front and back female connector, therefore no adaptors are needed
  • Non-circuited, passive connector works with all versions of HDMI

This home theater wall plate by PowerBridge combines three different types of video cabling into one, allowing you to connect your TV, satellite, Blu-Ray player and many more devices. By using this wall plate, eliminate unsightly audio/video cables that run along your baseboards, walls and floors and divert them to run behind the walls for a clean and professional look. This insert by Powerbridge fits in a Decora-style wall plate (sold separately).

The port is a non-circuited passive connector that works with all versions of HDMI. Both sides of the insert are female connectors, therefore standard component, s-video and HDMI cables can be used and no adaptors are needed for installation. This product is sold as a single unit therefore you will need a second insert to complete the installation properly. Once the two inserts are installed in their desired location, connect the A/V source, like your stereo receiver, DVD or Blu-Ray player, to the first port. Connect the two ports together inside your wall with appropriate cables and complete the installation by connecting your display or HDTV to the second port. If you are installing this port in one room in your home and connecting to a source in a different room, you will need an IR Receiver Kit to control your device.

Note: When installing an HDMI cable behind walls, please verify that the cable is CL2 or CL3 rated to meet local fire codes. Be sure to get a CL-Rated HDMI cable for in-wall installations and a quality HDMI Cable to complete your installation, each sold separately. Read More

Centralizes Connection Points for AC Power, Audio, Video, Data, and Phone

February 19, 2012 1 comment

Leviton 690-I 2-Gang Recessed Duplex Receptacle with QuickPort Plate - Ivory

 

 

If you ever thought about installing outlet receptacles and audio video connections behind your flat-screen TV or electric components, we have the answer. The Leviton Recessed Duplex Receptacle with QuickPort plate mounts flush to the wall with two AC outlets and the capacity for six QuickPort connections that are also recessed into the wall. The AC outlets are ideal for supplying power to your TV and cable or satellite receiver. QuickPort snap-in connectors (sold separately), are available for your audio and video connections. The package comes with a plastic electrical box; the receptacles fit inside the box and have a built-in wallplate for a flawless, flush-mount installation. Your connections will fit perfectly in this unobtrusive design that will let you centralize your connections and manage them from one location.

Snap-in connectors are designed to work with Keystone, QuickPort, and Modular style wallplates. These wallplates typically have from one to six inputs (ports) for snap-in connectors. Installing a snap-in wallplate allows you to make wiring connections and runs inside your wall. You can use various snap-in connectors to customize your snap-in wallplate with telephones, networking, audio/video (AV) components, speakers and other cable connections. Having a central connection point on the wall is a great way to add a professional finish to your installation and is a simple way to manage your in-wall wiring setup that provides quicker and easier terminations. Read More

Connect All of Your Audio Video Components and Extend Over Multi-Mode Fiber Optic Cable up to 1000 Meters

February 6, 2012 Leave a comment

Hall Research HR-733 HDMI/DVI, VGA, Audio, RS-232 Over Multi-Mode Fiber

 

The HR-733 is the perfect solution to extend your HDMI video, VGA, audio, and bi-directional RS-232 up to 1,000 meters over one multi-mode fiber optic cable. This unit accepts 2 HDMI or DVI inputs and 1 VGA or YPbPr with corresponding audio. If you have a dedicated home theater or centralized location in your home or office this unit is the ideal solution. The switcher unit accepts 2 HDMI or DVI inputs and 1 VGA or YPbPr with corresponding audio (either via a standard 3.5mm audio cable or S/PDIF Toslink) and transfers all of the audio/video transmissions up to 1,000 meters over multi-mode fiber optic cable. All analog inputs are converted to HDMI and automatically scaled to the native resolution of the remote display. The receiver unit accepts the fiber cable and allows you to connect to your TV or display by using an HDMI cable. The unit is fully HDCP compliant and supports EDID pass-through from the remote display to the selected source. Virtually all PC and HDTV resolutions are supported.

The switcher unit has a high contrast front panel LCD display for easy setup and control of the system. Advanced features include: automatic scaling of the analog video input to match the native resolution of the remote display, diagnostic messages on the front panel LCD, audio delay of the analog input to correct lip sync, and 3D deep-color HDMI 1.4 support. Read more

Sleek, Screwless Wallplate Offers a Quick Installation and Clean Finish Guaranteed to Complement any Décor

April 27, 2011 Leave a comment

Leviton PJ3C-C0I Cheetah Midsize 3-Gang Toggle-Style Screwless Wallplate, Ivory

The stylish look of screwless wallplates teamed with speedy Cheetah installation delivers an unbeatable combination in homes and commercial buildings. The wallplates snap into four holes in each Cheetah device (sold separately) and do not require any tools to install or adjust – just snap and lock into place. The Midsize wallplate design provides .375″ more coverage than standard wallplates. This expanded silhouette provides a designer look and easily hides irregular drywall cuts or flaws around outlets. The patented Cheetah Speed System™ uses an electrician-developed, innovative speed anchor and snap and lock system that enables electrical devices to be installed without screws. It can increase the speed of installation by up to 50%, saving time and reducing labor costs on residential and commercial jobs. The Cheetah screwless wallplates have been designed to provide exceptional tight fit to Cheetah-enabled devices using eight (8) specially designed tabs. Each tab (top and bottom) provides resistance. As many as 6 tabs may break off and the wallplate still ensures a snug fit to the wall.

  • Works with Cheetah Speed System devices (only)
  • Hassle free installation – push (zip-tie) to secure a flush with the wall
  • Midsize design hides imperfections around the wall box
  • Matte finish
  • Made from high strength thermoplastic
  • Read more

    *Since we strive to provide you with the lowest prices, prices are subject to change.

    Sleek, Screwless Wallplate Offers a Quick Installation and Clean Finish Guaranteed to Complement any Décor

    April 18, 2011 Leave a comment

    Leviton PJ4C-C0T Cheetah Midsize 4-Gang Toggle-Style Screwless Wallplate, Light Almond

    The stylish look of screwless wallplates teamed with speedy Cheetah installation delivers an unbeatable combination in homes and commercial buildings. The wallplates snap into four holes in each Cheetah device (sold separately) and do not require any tools to install or adjust – just snap and lock into place. The Midsize wallplate design provides .375″ more coverage than standard wallplates. This expanded silhouette provides a designer look and easily hides irregular drywall cuts or flaws around outlets. The patented Cheetah Speed System™ uses an electrician-developed, innovative speed anchor and snap and lock system that enables electrical devices to be installed without screws. It can increase the speed of installation by up to 50%, saving time and reducing labor costs on residential and commercial jobs. The Cheetah screwless wallplates have been designed to provide exceptional tight fit to Cheetah-enabled devices using eight (8) specially designed tabs. Each tab (top and bottom) provides resistance. As many as 6 tabs may break off and the wallplate still ensures a snug fit to the wall.

    • Works with Cheetah Speed System devices (only)
    • Hassle free installation – push (zip-tie) to secure a flush with the wall
    • Midsize design hides imperfections around the wall box
    • Matte finish
    • Made from high strength thermoplastic

    Read more

    *Since we strive to provide you with the lowest prices, prices are subject to change.

    Follow

    Get every new post delivered to your Inbox.

    Join 97 other followers

    %d bloggers like this: