Archive

Posts Tagged ‘Halloween’

Track Down Ghosts and Paranormal Activity with The Ghost Meter

October 16, 2013 Leave a comment

Ghost Meter

  • Specifically designed for ghost hunting
  • Measures electromagnetic fields from 0 to 5 milligauss
  • Simple one-handed operation
  • Light and sound indicators alert you of EMF activity

Halloween is fast approaching and what better way to keep safe from ghosts and goblins than with your own Ghost Meter? This Ghost Meter is callibrated to detect the distinct, eratic EMF energy flucuations frequently found in reputed haunted locations and comes with a set of ghost hunting instructions to coach you on how to hunt ghosts like a professional ghost hunter! It has been calibrated to ignore the extremely subtle EMF emissions surrounding the human body and is an accurate instrument with a needle readout that measures from 0 to 5 milligaus and is devoted to monitoring high quality paranormal activity. An adjustable audio tone and flashing LED light indicators are built in that allow you to use the meter in the dark or without looking at it and detect activity from far away. It can also be operated in silent mode so it doesn’t interfere with EVP (Electronic Voice Phenomenon) recordings or distract other investigators during an investigation. Strong, erratic, and/or fluctuating readings are commonly found in haunted locations as these energy fields seem to have a connection to the presence of ghosts. Often, pictures taken of the area where these reading occur will produce an apparition. Be the next ghost hunter and conduct your own paranormal surveys anywhere you go with this lightweight, compact ghost meter. This product requires the use of one 9 volt battery, sold separately. Take advantage of our pre-Halloween special and get it now for $10 off! Read More

Halloween is Only 9 Days Away! Make Sure You & Your Kids are Prepared for Trick-or-Treating!

October 21, 2011 Leave a comment

Halloween is meant to be spooky, but make sure to avoid real dangers that you and your children could face while trick or treating. Although you may know the safe ways to trick or treat, here are a few tips from the Consumer Product Safety Commission.

  • Treats: Warn children not to eat any treats before an adult has carefully examined them for evidence of tampering.
  • Costume Designs: Purchase or make costumes that are light and bright enough to be clearly visible to motorists.
  • Pedestrian Safety: Young children should always be accompanied by an adult or an older, responsible child. All children should WALK, not run from house to house and use the sidewalk if available, rather than walk in the street. Children should be cautioned against running out from between parked cars, or across lawns and yards where ornaments, furniture, or clotheslines present dangers.
  • Choosing Safe Houses: Children should go only to homes where the residents are known and have outside lights on as a sign of welcome.

If your child still wants that spooky costume that just might be too dark for the night, consider using the below products. And even if their costume is clearly visible make sure that you are extra sure they can be seen by using a flashlight.

Maxsa Innovations, LLC 20026XL 16 LED Reflective Safety Vest

Maxsa Innovations, LLC 20026XL 16 LED Reflective Safety Vest

Neklight 793259 Neklight Wearable LED Flashlight - Silver

Neklight 793259 Neklight Wearable LED Flashlight - Silver

Sylvania DOT-it LED Lite Stick, Red

Sylvania DOT-it LED Lite Stick, Red

Get into the Halloween Spirit & Have Some Spooky Fun by Using a Ghost Meter to detect Paranormal Activity!

October 20, 2011 Leave a comment

Ready for Halloween?

Are there ghosts that lurk around us as we go about our daily lives?

What better time to find out but Halloween!

Come to your own conclusion and do your own investigation using the Ghost Meter. Aside from a camera, it is the most basic tool for any ghost hunter. When ghostly activity takes place, electromagnetic anomalies often occur in the environment. This meter allows you to detect these electromagnetic frequency (EMF) disturbances.

The Ghost Meter is an accurate instrument with a needle readout that measures from 0 to 5 milligaus and is devoted to monitoring high quality paranormal activity. The Ghost Meter has been calibrated to ignore the extremely subtle EMF emissions surrounding the human body, yet is still sensitive enough to detect the small, distinct, erratic EMF energy fluctuations frequently found at reputed haunted locations. An adjustable audio tone and flashing LED light indicators are built in that allow you to use the meter in the dark or without looking at it and detect activity from far away. It can also be operated in silent mode so it doesn’t interfere with EVP (Electronic Voice Phenomenon) recordings or distract other investigators during an investigation. Strong, erratic, and/or fluctuating readings are commonly found in haunted locations as these energy fields seem to have a connection to the presence of ghosts. Often, pictures taken of the area where these reading occur will produce an apparition. Be the next ghost hunter and conduct your own paranormal surveys anywhere you go with this lightweight, compact ghost meter. This product requires the use of one 9 volt battery, sold separately. Read more

Halloween Time Means Carving Pumpkins, But Make Sure Your Jack-o-Lantern Has Safe Halloween Lighting!

October 7, 2011 1 comment

With Halloween only a few weeks away, you will start carving pumpkins and putting out all your spooky Halloween decorations! Since carving pumpkins into great masterpieces is always fun, here are some great tips on how to carve a Jolly jack-o’-lantern!

Thanks to eHow.com, here are some basic tips to making sure that your jack-o-lantern welcomes trick-or-treaters for an invitation to stop by for a Halloween surprise.

  1. Select a fresh pumpkin in a shape that pleases you. Some folks prefer their pumpkins low and round, while others like them tall and oval-shaped.

  2. Draw a circle or hexagon on top of the pumpkin in preparation for making an opening large enough for your hand to reach through.
  3. Cut through the stem end of the pumpkin along your outline with a sharp knife or pumpkin-carving tool.Use a back-and-forth slicing motion to cut through the thick, tough skin.
  4. Remove the stem end, which will act as a cap, making sure you scrape off any seeds or pulp.
  5. Use a large spoon to scoop out the seeds and pulp from inside the pumpkin. Hold the spoon by its bowl to get extra leverage while scooping.

  6. Draw a pattern for the face on the clean pumpkin with a felt-tip pen, or scribe the lines into the skin using a pencil. Be sure to make the eyes, nose and mouth large enough; you’ll have a hard time cutting out tiny features when you’re using a big knife blade to saw through tough skin.

  7. Follow your pattern as you cut all the way through the pumpkin.

  8. Push the cut-out features gently from the inside of the pumpkin and discard the pieces.

  9. Place a votive candle inside the pumpkin to create an eerie glow.

Carving pumpkins are the best part of Halloween time for many, but there is always the hassle of which type of lighting you will be putting inside your pumpkin to illuminate your beautiful carving masterpiece! Make sure that you use safe lighting, and at the same time that it looks cool! And the best part…its affordable!

Smarthome LED Color Changing Sinker Ball

It’s Halloween Weekend! Bust out the Ghost Meter!!

October 29, 2010 Leave a comment

Halloween is this Sunday, October 31st! In the spirit of Halloween why not use this Ghost Meter to see if that Haunted House on the corner is really haunted!?

Ghost Meter

Are there ghosts that lurk around us as we go about our daily lives? Come to your own conclusion and do your own investigation using the Ghost Meter. Aside from a camera, it is the most basic tool for any ghost hunter. When ghostly activity takes place, electromagnetic anomalies often occur in the environment. This meter allows you to detect these electromagnetic frequency (EMF) disturbances.

The Ghost Meter is an accurate instrument with a needle readout that measures from 0 to 5 milligaus and is devoted to monitoring high quality paranormal activity. The Ghost Meter has been calibrated to ignore the extremely subtle EMF emissions surrounding the human body, yet is still sensitive enough to detect the small, distinct, erratic EMF energy fluctuations frequently found at reputed haunted locations. An adjustable audio tone and flashing LED light indicators are built in that allow you to use the meter in the dark or without looking at it and detect activity from far away. It can also be operated in silent mode so it doesn’t interfere with EVP (Electronic Voice Phenomenon) recordings or distract other investigators during an investigation. Strong, erratic, and/or fluctuating readings are commonly found in haunted locations as these energy fields seem to have a connection to the presence of ghosts. Often, pictures taken of the area where these reading occur will produce an apparition. Be the next ghost hunter and conduct your own paranormal surveys anywhere you go with this lightweight, compact ghost meter. This product requires the use of one 9 volt battery, sold separately.

  • Specifically designed for ghost hunting
  • Measures electromagnetic fields from 0 to 5 milligauss
  • Simple One handed operation
  • Light and sound indicators alert you of EMF activity
  • Price: $34.99

Read more

*Since we strive to provide you with the lowest prices, prices are subject to change.

Not Convinced? The Ghost Meter has 4.5 out of 5 stars Customer Rating on our website! Read the Reviews here!

Follow

Get every new post delivered to your Inbox.

Join 97 other followers

%d bloggers like this: