Archive

Posts Tagged ‘Car’

Tired of Loosing Functionality of your iPhone and Applications After Connecting to your Car’s Stereo?

December 20, 2011 Leave a comment

Look no further your solution is here, The OCar Audio Head Unit from Oxygen Audio is now in stock!  Upgrade your old car stereo system and start to enjoying your driving experience today!

Messy wires, lost functionality and unreliable charging will be a thing of the past once you upgrade your car’s stereo to the new OCar Audio Head Unit. Wether your car is new or old there is a good chance your stereo lacks an infotainment system.

This unit is an affordable upgrade to bring your driving experience up to date with the latest technology available on the market. It is easy to install and functions flawlessly with your iPhone and iPod.

 The OCar gives you the ability to:

  •  Connect an iPhone 3G, 3GS, 4 or 4S to your car’s infotainment system.
  • Run any iPhone Application while driving.
  • Transform your iPhone into the display of your car’s stereo.
  • Make handsfree phonecalls with your car.
  • Rotate your iPhone 360° and swivel 15° to allow you to set it to just the right angle.

All of these great features are packed into one well designed and priced package from Oxygen Audio. Normally $299.95, we lowered our price to $258.97 for this unique product release.

Read more

Jump Start your Car from the Inside!

Viatek MJ01B Mighty Jump Vehicle Emergency Jump Starter

Viatek MJ01B Mighty Jump Vehicle Emergency Jump Starter

Mighty Jump is an emergency jump-starter that allows you to Jump-start a vehicle without leaving the drivers seat. When the mighty jump is plugged into the dashboard cigarette lighter it transfers power from itself to the car battery, using the internal wiring of the vehicle. Using the Mighty Jump on a car that needs a jump-start is easy. First turn the ignition/key to electrical accessory mode (where the radio and clock are on but not the a/c system). Then plug in the Mighty Jump charging cable into your 12v outlet with the other end NOT yet plugged into the jumper body. With the switch in the rearward position there should be a green light indicating that your car battery is ready to be charged. Plug the cable into the jumper body and push the switch on the 12v plug forward to initiate charging.

  • Small enough to store almost anywhere
  • No more confusing jumper cables that rely on a jump-start from another car
  • Charges car battery when adaptor is plugged into a standard car cigarette lighter
  • Takes only 10 minutes to charge a car battery enough to start the engine
  • Multiple uses, rechargable

Read more
*Since we strive to provide you with the lowest prices, prices are subject to change.

Help Develop Safe and Confident Driving Habits

August 23, 2010 Leave a comment

Lemur LMSD-001 SafeDriver

Hesitant to let your teenager borrow the car because of their poor driving habits? Use the LMSD-001 SafeDriver to monitor their driving and promote safety. The easy-to-read keyfob display will keep track of the car’s maximum speed, distance traveled, and number of sudden stops since the last reset.

The unit’s simple installation will give you peace of mind in a matter a minutes. Simply plug the sensor into your vehicle’s OBD-II port and sync to the keyfob display. Data will be sent from the sensor to the keyfob via radio frequency. The keyfob attaches to your keychain, so you easily access the data without getting into the car. And as long as the sensor and keyfob are synchronized, the sensor will continue to collect and transmit data, even if the keyfob is not in the vehicle.

SafeDriver has a built in tamper alert, letting you know if the system has been unplugged or if the keyfob battery has been removed. Resets require a PIN and if an incorrect PIN is entered a tamper notice will flash on the display until the valid PIN is entered.

  • Easy to Install – no tools, computer or wiring needed
  • Displays maximum speed, distance traveled and number of sudden breaks
  • Tamper notifications if the unit has been unplugged, battery removed or unsuccessfully reset
  • Price: $56.99
  • Read more

    Mount Handheld Devices for Easy Access and Viewing

    August 20, 2010 Leave a comment

    Product Title (In box)

    The Scosche Mobile Grip-IT Windshield Mount is the most convenient accessory for GPS and hand-held devices. It easily attaches to your windshield, while its flex shaft provides a sturdy and easily accessible mounting solution for hand-held electronics. Clamping arms on the mount open up to 4.5″ wide, making it compatible with virtually any hand-held device. A flexible neck can rotate up to 360 degrees to put your device in the best viewing and operating position possible.

  • Provides a stable, secure, and easily accessible mounting solution
  • Allows clamping arms to open up to 4.5″ wide accommodating most portable devices
  • Price: $19.99
  • Read more

    Charge and Mount Virtually Any Portable Device in Your Car

    August 19, 2010 Leave a comment

    Product Title (In box)

    The Scosche powerMOUNT™ is a universal charging mount that allows you to secure and charge your iPod, iPhone, MP3 player or cell phone from your vehicle’s 12 Volt dash socket. In addition, the powerMOUNT features its own 12 Volt socket to power other accessories. With the rotating T-notch ball mount, you can position your device to the easiest viewing and operating position.

  • 360 degree rotating device holder is perfect for iPod, iPhone, MP3, Blackberry, cell phones, and more
  • Use your existing USB cable to charge most devices, including iPhone 3G, iPhone, iPod, MP3, Blackberry and more
  • Locking 12V power port ensures a secure fit in most vehicles
  • Price: $29.99
  • Read more

    Follow

    Get every new post delivered to your Inbox.

    Join 92 other followers

    %d bloggers like this: