The Prazi Set-&-Go Floor Tile System is a lightweight adjustable tile spacing device that helps in obtaining perfect spacing and grout line consistency between tiles. The Set-&-Go is an “I” shaped frame that adjusts in both length and width. It’s equipped with special attachable legs that eliminate multiple bags and buckets filled with the old fashion, conventional plastic spacers. With the Set-&-Go there is no need to go back and remove spacers from between grout lines to prepare for grouting. The Set-&-Go now solves these types of time consuming problems. By attaching only four unique Set-&-Go spacer legs, multiple tiles can be set and spaced simultaneously.
If you’ve ever laid flooring tile, you know what a pain it can be to line up each tile properly with perfect spacing between each tile. The traditional method calls for using bags of little plastic spacers that need to be individually set and then removed before adding in the grout. But now Prazi comes to the rescue and redefines the way you’ll work with tile with their Set and Go Tile Setter.
- Fully adjustable for 8 to 16 inch floor tiles
- Use for both parallel and staggered tile patterns
- Can simultaneously set and space multiple tiles
- Eliminate the need to remove spacers before grouting
- Read more
Rackmount Power Distribution Unit with 2 Stage Surge, 9 Power Outlets, Light Ports and Surge Status Notification
The PD-915RV-RN rackmount power distribution unit with local and remote notification of surge suppression status is equipped with 8 rear outlets and one front outlet. Two front LED status indicators display the level of protection provided by the unit’s 2 stage surge and spike suppression. The PD-915RV-RN provides notification of surge suppression status to any customer supplied monitoring device. The 9″ depth provides easy access to the vertically oriented, 15 amp rear outlets, which have been spaced to accommodate plug-in power supplies. Clean ground surge suppressor design will not pass noise contamination to the ground. This unit features a generous 9 foot cord and an illuminated combination power switch/circuit breaker. Finished in a durable black powder coat and occupies one rackspace.
The Middle Atlantic PD-915RV-RN has a 15 Amp capacity, 2 stage normal mode spike and surge suppression with dry contact , LED status indicators and EMI filtering. PD-915RV-RN with normally open contact closure for remote surge suppression status notification to customer supplied monitoring device operates on 120 volt AC/60Hz nominal power. This unit includes a 9 foot SignalSafe™ 14/3 power cord with NEMA 5-15P plug, one front outlet and eight vertically oriented NEMA 5-15R outlets spaced for plug-in power supplies and 15 amp circuit breaker located on the front of the unit. “Clean ground” surge suppressor design does not pass noise contamination to the ground. Includes 2 rear and 1 front USB style, 5 volt DC output ports for connection of optional LED gooseneck work light (sold separately). The PD-915RV-RN occupies one rackspace and is constructed of 18-gauge steel with a durable black powder coat finish. This unit is ETL listed to UL standard 1419 in the in US and to CAN/CSA C22.2 #1 in Canada. Rackmount power distribution is GREENGUARD Indoor Air Quality Certified for Children and Schools and is RoHS EU Directive 2002/95/EC compliant. Read More
- Overload protection and indicator
- Two AC grounded outlets and one USB outlet
- Auto reset short circuit protection
- Low battery shutdown when DC voltage falls
- Built-in surge protection
The Wagan Tech Smart AC 150 USB II Power Inverter is portability at it’s best. The Smart AC is powered from a 12 volt DC source and provides 120 volts AC 60Hz through two North American standard outlets to AC appliances up to 150 watts. The AC waveform is a modified sine wave (MSW) which approximates the sine wave of household electrical service. An attached DC power cord connects to a 12 VDC cigarette lighter socket. There is a USB power port that can be used to charge cell phones, PDAs and MP3 players. Safety features include automatic shutdown in the event of overheat, overload, under voltage and over voltage conditions.
This inverter has features that will prevent your battery from being completely discharged. An audible alarm will sound when the battery voltage is 10.5 volts. If you hear this alarm we recommend operating your engine for 10-20 minutes to recharge the vehicle’s battery. With normal care and proper treatment it will provide years of reliable service. Read More
The Velleman VTSET23U 18 Piece Wiring Technician Tool Kit includes everything you need for common wiring applications and installations. Pliers, cutters, strippers, wrench, screwdriver, voltage tester and soldering iron – just to name a few of the included, essential tools for the DIY’r and tradesman. Read More
- Electromagnetic field strength measurement
- Mobile phone base station antenna radiation measurement
- RF power measurement for transmitters
- Wireless LAN (Wi-Fi) detection/installation
The Extech Instruments Electromagnetic Field (EMF) Strength Meter monitors high frequency radiation in the 10MHz to 8GHz range. This meter is ideal for cell phones, base stations, locating RF hotspots, wireless network (Wi-Fi) RF detection, RF “Electrosmog” detection, microwave leakage, and wireless communication applications (CW, TDMA, GSM, DECT). It features non-directional measurement with 3-channel (tri-axial) measurement probe, Max Hold and Average functions, and manual store/recall of up to 99 data sets. In addition, there is an audible alarm with a user-selectable threshold. The meter comes complete with a 9V battery and carrying case. Read More