- Temperature-controlled sleeping pad for a comfortable night’s sleep
- Adjustable from 46 to 118 degrees F in 1-degree increments
- Employs same water-based coil system as semiconductor technology
- Built-in thermostat maintains the set temperature all night long
Your best night’s sleep is a few degrees away! Chili Technologies ChiliPad is a mattress pad with a cooling and heating temperature control system built in. It regulates the surface temperature of your mattress so that you sleep comfortably all night long.
Designed to fit all standard and extra thick mattresses, this unique 150 thread count, poly cotton mattress pad uses soft medical grade silicone tubing to circulate regular water through the pad. A built in connection tube (48″ in length) connects the pad to the control unit. Control the temperature at the touch of a button either directly on the control unit or conveniently in bed with the wireless remote control. Set the temperature in 1° increments from 46° – 118°F. The control unit heats or cools regular water to your set temperature and circulates it through the pad, generally achieving temperatures between 60° – 110°F on the bed surface. A thermostat maintains the set temperature, letting you sleep at your ideal temperature throughout the night.
In most cases, temperatures above 75 degrees F and below 54 degrees F will disrupt sleep, but even sleep researchers fail to agree on the perfect temperature for a restful night’s slumber. Enter the ChiliPad bed temperature control system, an innovative mattress-top sleeping pad that cools or heats the bed depending on your sleeping preferences. As a result, you can find an ideal temperature whether you prefer a slightly cooler mattress–usually recommended for better REM sleep–or a warmer mattress, a must when the mercury outside drops. Read More
- 1-2 minute soak in water for 5-10 hours of cooling
- Re-soak as needed when cooling wears off
- For indoor and outdoor use
- Dog pad is 21 inches x 30 inches
- For dogs about the size of a beagle
You’re going to need to keep cool as our planet continues to heat up. Your little furry friend, the one with the wagging tail, is no exception. Keep Mr. Beans cool during the hottest of days with some pretty cool technology (pun intended). A giant cooling pad from HyperKewl promises to keep your wet-nosed pal comfortable during high temperature days. Just soak it in water for roughly two minutes and receive some five to ten hours of cooling. Perfect for outdoor, under the Sun cuddle-nap sessions with your best friend.
Here’s More Essential Information:
As the weather continues to heat up, more measures must be taken in order to not only keep ourselves cool but our canine friends as well. With an Evaporative Cooling Dog Pad from HyperKewl™ all it takes is 1-2 minutes of soaking in water to give your dog a cool place to sit for up to 10 hours. Upon submerging the pad in water, the HyperKewl fabric used will absorb, store and then release water within the pad through evaporation to cool your dog down. After removing the coat from soaking, excess water should be gently squeezed out and wiped away. This process can be repeated as often as needed throughout the course of the day to provide continuous cooling. The Medium Evaporative Cooling Dog Pad is 21 inches x 30 inches and ideally sized for dogs approximately 40 lbs in weight. Read More