The Motion Sensor Floodlight is a fantastic way to add simple, automated lighting to your home. It was primarily designed to act as an outdoor floodlight, replacing an existing light by your font porch, back patio, garage door, driveway and other possible entryways/exits.
The Memowell Light TD1 Touch Dimmer is the perfect controller for setting the correct brightness for you under cabinet lighting. Create unique mood lighting for entertainment or adjust the brightness under the cabinets for added light. The easy to install switch is small in size and connects directly to the end of the light. This dimmer switch is compatible with all Memowell flat under cabinet LED light fixtures up to 36 Watts.
- Dimmer for flat under cabinet LED lights up to 36 Watts
- Dims the under cabinet lights to create the perfect mood lighting
- Controls the brightness for all connected lights
The Light Emitting Designs LED-1663 PAR30 10W Dimmable 7 LED Lamp in daylight (6000K) has a fully encapsulated, screw-in medium base mounting that integrates energy saving LED technology into a standard PAR30 format. Equivalent to a 50W PAR30 light output, this lamp lasts up to 50,000 hours of lamp life. The PAR30 10W lamp has been designed to retrofit existing PAR30 installations, thereby reducing maintenance and energy expenditures – and as an energy saving light source for new fixtures and installations.
Use for the following applications:
- Retail display applications
- Task lighting
- Recessed downlighting
- Residential lighting
The Solar Rock Light from Smart Solar features a photocell sensor to automatically activate its warm white LED at nightfall. The Rock Light has an integrated solar panel at its top to collect sunlight during the day and charge the included Ni-MH rechargeable batteries. By making the Rock Light solar powered Smart Solar took the hassle out of setting it up and gave it versatility. There are no wires to worry about and you don’t have to set it up based upon where an available AC outlet is. Simply determine what area of your yard you would like to add light to at night and set the rock there; it’s that easy. Even better is that the faux rock exterior will help it blend seamlessly into the landscape of the yard making it unnoticeable and a welcome addition to the yards décor. Multiple Rock Lights along a pathway will help guide you and your guests or place it near a favorite daytime decoration to make it visible even at night. The Solar Rock Light is easy to move and it is important to remember that it requires sunlight to charge its Ni-MH batteries. If left in an area of the yard that does not get adequate daytime sunlight then the Solar Rock Light will provide little to no nighttime light. In an instance like this it is best to leave it in an area of the yard that gets the most amount of sun during the course of the day and move it at night as needed. Another charging option available is to remove the batteries and charge them via a traditional battery charger (sold separately) should you not wish to do so through the solar panel.
Leviton’s D3206-2LW is a Multizone Controller and Dimmer system designed for those looking for an advanced, high-end residential device that can dim up to six zones all from one panel. The D3206-2LW can operate in two different ways: As a self-contained dimmer that can dim lights wired directly to the unit or as a control unit attached to the Leviton Control Network communication bus. Using “wizard” menus and pushbuttons to help guide you through settings and adjustments, the D3206-2LW will cater to multiple customizations and features an intelligent infrared receiver which can be used with a remote control. This controller can work with a vast D3200 dimming system or be used as a simple dimmer attached to six zones.
It only takes a few minutes to customize the D3206-2LW, allow it to cater to your specific zone and scene naming schemes. When selecting a specific zone the integrated LCD will display the name of the scene, and the current date and time. This same LCD display will also show the zone’s corresponding light level, making adjustment easy and allowing for simple repetitive settings to be inputted. Enabling a zone local to the D3206-2LW causes the LED status lights to activate displaying the number assigned to the specific zone as well as the selected zone’s brightness level. An auxiliary status indicator (“A”) will also light up when a zone is controlling an auxiliary device wired to the LCnet, but not directly to the D3206-2LW. There are up to eight scene buttons, with the selected and enabled scene button remaining lit. Once scenes have been programmed, any zone of your choice can be adjusted individually and separate from the enabled scene. Available push buttons provide a group dim, group brighten, maximum brightness, and an off switch.