- Magnetic sensor system for pool area door/gate
- “Always On” alarm protection
- Adult pass-through auto reset button
- High output 110-115 dB alarm
- Additional magnetic sensor for a second door/screen door
Eliminate the possibility of your children entering the pool area without your knowledge by adding a magnetic sensor alarm to your pool entry way. Pool owners can breathe a little easier with small children around thanks to the Techko S187D Safe Pool’s magnetic sensor system. This safety alert product is designed to monitor a gate or other entryway to your pool area. A high output 110 dB alarm siren sounds when the magnetic contact is broken without pressing the adult override button. Two sensors are included in each system so you can wire an additional gate or door. The system operates a 9V battery (sold separately).
When installed properly, the Safe Pool allows adults to pass through the protected entry/exit and immediately shut off the sounding alarm. The Safe Pool is always in protected mode when powered, and the alarm will sound the instant the door/gate opens more than 1 inch. Once activated, the alarm sounds continuously until the bypass button is triggered. The Safe Pool Magnetic Sensor Entry Alarm is ETL listed and approved under UL 2017 standards. Read More
Would you like to have the newest, most convenient, and most reliable carbon monoxide and smoke detector on the market?
Then the ONELink Carbon Monoxide and Smoke Detector with Voice from First Alert is the perfect product for you. The unit comes equipped with an actual voice that speaks the type and location of danger in your home. This will help you make the best decision possible in an emergency situation.
The ONELink feature enables you to install up to 16 carbon monoxide and/or smoke detectors inside your home. Once installed, ONELink enabled alarms will immediately begin communicating with each other. If one alarm is triggered, they will all sound the alarm. The unit is powered by two (2) AA batteries which are included with your purchase.
When testing this product I found it to be very simple to program. You literally insert the two included AA batteries and the unit will walk and talk you through the set-up process. When linking multiple ONELink enabled alarms I had to press and hold the test button while pushing the the battery drawer in. It’s that easy!
- Uses highly reliable, commercial-grade, electro-chemical sensing technology
- Built-in trouble/power supervision relay
- 12 or 24VDC operation and 150mA relay contact configurable for normally open or normally closed operation
- Long-life six-year sensor
- Transmits sensor end-of-life to the control panel and central station if the system is monitored
- Fully listed to the latest UL 2075 CO standard for residential or commercial occupancies
- Adapter plate makes replacing GE 240-COe CO detector simple
Protect yourselves from this odorless, colorless and potentially deadly gas with a carbon monoxide detector / alarm built to the same high standards of those that protect industrial plants and hospitals! A built-in electrochemical sensor continuously monitors for CO and is unaffected by other airborne substances or temperature variations. Additionally, this carbon monoxide detector’s quick response time, fastclearing time and superior false alarm immunity tower above the reliability levels of other CO alarms!
This wireless solution couldn’t be any easier to install or use, and makes life more convenient. Simply mount the battery powered sensor on your mailbox door using double sided tape (included), and then plug the receiver into an electrical outlet anywhere in your home. When your mail is delivered, you’ll receive and audible and visual notification; the sensor transmits a wireless signal to the receiver, which will beep four times and a bright red LED will illuminate. This solution has a 450 foot wireless communication range and an adjustable volume control. The sensor works on curbside, wall mounted, and slot type mailboxes, making it ideal for almost any application. Just press the reset button after retrieving your mail to set the Mail Chime up for the next day’s delivery. Additionally, the Mail Chime can be used as a security device to notify you if someone is tampering with your mailbox. Includes a long lasting 12 volt battery.
Increase security to exterior entryways of your home or office by installing the Enforcer Indoor/Outdoor Wall Mounted Photoelectric Beam Sensor. The Transmitter/Receiver sensor has a rugged all-weather waterproof enclosure and a range of up to 35 feet that ensures reliable operation in just about any environment.