Archive

Archive for July 9, 2012

Boost Existing (but Insufficient) Ventilation for Audio and Video Components

July 9, 2012 Leave a comment

Active Thermal Management 01-008-03 Cool-slim Component Cooler

The Active Thermal Management 01-008-03 Cool-slim Component Cooler is designed to boost existing (but insufficient) ventilation for audio and video components. Very slim, it will solve overheating problems where components sit on closely-spaced shelves. Its 1 9/16″ height can be reduced to 1 5/16″ by removing the Cool-slim’s feet. It will cool components with and without vent openings in their top covers, and is temperature-controlled. The Cool-slim Component Cooler is placed on top of a hot component and will cool it quietly. Some types of audio-video equipment have ventilation openings on their top surface while others do not; Cool-slim can cool either type. Hot air is drawn from the component and exhausted through its front and rear openings.

The Cool-slim Component Cooler was designed to cool components in an open, or partially open, environment such as on a shelf, in a bookcase, or in a cabinet with no doors and/or an open back. It cannot cool components in sealed enclosures; it would just circulate the same hot air within the enclosure, providing little cooling.
Read more

Safely Trap Mosquitoes and Nuisance Insects in a 1/2 Acre Area

July 9, 2012 Leave a comment

DYNATRAP DT1250 Twist On/Off Indoor/Outdoor Mosquito and Insect Trap with Pole Stand

Take back your yard without the need for added chemicals, pesticides, refills, and no zapping or buzzing. The DYNATRAP DT1050 Indoor/Outdoor Insect Trap is the future of capturing insects. The Dynatrap uses three patented technologies: (1) Two fluorescent lights generate heat and UV rays day and night, (2) a titanium dioxide-coated funnel produces CO2, and (3) a powerful fan sucks insects into the trap. The insects are lured to the powerful vacuum fan, where they are collected and trapped into the retaining cage away from the area of usage providing the user safe pest protection and comfortable living quarters. A trap door automatically closes when power goes off, in order to prevent the critters from escaping. Its rugged all-weather construction is designed to survive life outdoors. However, it is also perfectly safe for use indoors, as it uses no chemicals and produces no odors. The DT1050 features a twist on/twist off mechanism for activation.

The Dynatrap is the leading long-term solution scientifically proven to safely and effectively reduce mosquitoes and other flying insects. Photocatalyst technology and special light will help you drastically reduce the mosquito population and other annoying flying insects in your yard. The unit is whisper-quiet and the only sound is from the built-in fan, which is equivalent to a computer fan.
Read more

Quickly provide protection for your lungs, head, eyes, and face during a fire or gas leak

July 9, 2012 Leave a comment

The Elmridge Protection EBP-900 iEvac Smoke/Fire Hood is an air purifying respiratory device to assist in breathing clean air for immediate evacuation in case of an emergency. It protects against Carbon Monoxide, smoke, hydrogen cyanide, chlorine, ammonia, sulfur dioxide, CS, CN, hydrogen sulfide, soot, fumes, aerosols, and more. It even contains a HEPA P100 filter that removes sub-micron particles such as anthrax, smallpox, and radioactive particles. It maintains this high level of protection by using a silicone neck dam to seal out the environmental contaminants, and at 9.5 in. (240mm) it can withstand up to 1700° F (527° C) in radiant heat. The U. S. Consumer Products Safety Commission states about escape masks “Emergency escape masks have the potential to reduce consumer-related deaths and injuries by assisting in egress from fires, provided they perform effectively and reliably.

The iEvac Smoke/Fire Hood is first and only hood Certified to the American National Standard for Smoke Escape Devices, ANSI/ISEA 110-2009, for Respiratory Protective Smoke Escape Device (RPED). This certification is earned after extensive independent testing to prove compliance with every requirement in the Standard.

Read more

Save Money – Convert Any Analog Camera Into a Fully Functional IP Camera

July 9, 2012 Leave a comment

Two Channel Analog to Digital IP Video ServerTurn ordinary surveillance cameras into IP cameras and view them from anywhere in the world using the Two Channel Analog to Digital IP Video Server. The server takes regular analog surveillance cameras and upgrades them into a networked IP surveillance system that can be viewed from the internet. This means you can keep and eye things at home while you are work or vacation halfway around the world by viewing a real-time video feed from your surveillance cameras. The server supports two cameras as well as two audio feeds, so even if your camera doesn’t have an audio feed you can connect a remote microphone. Another great feature is that it includes input/output (I/O) control, offering the ability to set up input sensors to trigger recording or use ouput control turn on lights or unlock doors. Other advanced features such as video snapshot and digital video recording to your computer hard drive, picture-in-picture viewing, alarm notification, and Pan/Tilt/Zoom (PTZ) camera control make this video server an extraordinary value. Gain piece of mind knowing that you can remotely view and record high resolution imagery any time you want or via notification as a result of motion detection.

Read more

Follow

Get every new post delivered to your Inbox.

Join 92 other followers

%d bloggers like this: