Do you have a need to know when vehicles enter your driveway?
This sensor is designed to be buried 6″ to 12″ deep and uses changes in the earth’s magnetic field to detect when vehicles pass over. Note this is not a presence detector but a motion detector – vehicles must be moving 5 mph or more in order to be detected. Its sensitivity is adjustable in 10 steps with a remote sensitivity adjustor to customize for your traffic pattern. The detector’s non-volatile memory retains the setting so the remote may be removed, thus reducing power consumption. This also prevents unwanted changes to your settings. At maximum sensitivity it has a 12′ detection range, depending on vehicle mass and speed. A green LED indicates power on, and the device can accommodate voltages between 9 to 41VDC or 6 to 29VAC. The output is a SPDT form C relay.
Have you ever left for work in the morning only to realize that you accidentally left the garage door open all night long?
Restore your peace of mind with the Autocloser-GA, an automatic garage attendant that automatically closes your garage door when you inadvertently leave it open. The Autocloser-GA incorporates the latest micro-controller technology, infrared light sensors and advanced software algorithms to deliver a safe and reliable product — yet it installs onto most garage door openers in minutes! There’s even a disable button you can press for those times where you do want to keep the garage door open. Only basic hand tools are needed for proper installation. The unit is AC powered (adapter included).
The Autocloser-GA monitors the garage door’s position and the disable button. When it senses that the garage door has been open for a set period of time (user selectable: 2, 5, 10, 15 and 20 minutes)— and the disable button has not been activated — the garage door will close. The automatic closer does this by connecting to the terminals on the garage door opener wall button, thus simulating the press of a button.
The installation process for the Autocloser-GA is a simple process that takes approximately 20 minutes. The installation manual provides a step-by-step procedure, complete with illustrations. Only commonly available basic hand tools are needed for proper installation (drill, screwdriver, adjustable wrench and a wire cutter/stripper). Read more
A new form of pickpocket has appeared on the scene, and you don’t even need to be physically touched to lose your valuables. Crooks now can electronically scan your credit and ATM cards, while they are still in your wallet or purse, without you ever knowing about it. At least, not until you get your next statement! Fight back by making it as hard as possible to steal what is rightfully yours. The Rogue wallet has a patented shape that conforms to the front pocket in most pants, making it harder to physically steal it, and also has WalletGuard built-in. This is a special lining which blocks RF, preventing electronic thieves from stealing your information. This wallet is made of black full grain leather for a casual style.
- WalletGuard technology blocks RF
- Patented shape deters pickpockets
- Full grain leather for casual style and durability
The Intwine Energy IECT-210 Intwine Communicating Thermostat, Basic is a full-featured internet-connected programmable thermostat that offers affordable comfort at the click of a mouse. When programmed properly the IECT-210 is capable of saving homeowners 15-20% on heating and cooling costs or close to $200 annually (Energy Star). Realizing these savings has never been simpler with the ability to remotely monitor and control the IECT-210 with Intwine’s consumer web-portal and iPhone app! With the IECT-210 and Intwine’s connectivity solution, there is finally a completely flexible platform capable of simultaneously fulfilling the needs of both energy providers and consumers.
Remote Access and Control
The Intwine Energy IECT-210 Communicating Thermostat comes with a free basic monitoring services package – allowing you to check on your current energy status anytime from your computer or from a mobile device via a web portal. Additionally, the Intwine Energy IECT-210 Communicating Thermostat comes with a premium control service for free for 30 days upon registering through the web portal. After the first 30 days, an annual fee of $15 is required for the premium control service (but not the basic monitoring services); The premium control service is sold separately through Intwine Energy.
IECT-210 vs IECT-220
Intwine Energy also offers a variation of this thermostat, it is the Intwine Energy IECT-220 Wi-Fi Communicating Thermostat, sold separately. The IECT-220 has a larger touch-screen, and it displays on-screen text messages which allows it to act as an in-home display for other Intwine devices, while the IECT-210 does not have this capability. Also, the IECT-220 can send alerts when new HVAC products like air filters, etc. need to be purchased, while the IECT-210 cannot do this. The IECT-220 measures humidity while the IECT-210 does not. The IECT-220 supports up to 3 stages of heat and 2 stages of cool, while the IECT-210 only supports 2 stages of each.
- Cable Organizational Tool
- Quick Connect/Quick Release
The Cable Clamp is an innovative and easy-to-use cord management and organizational tool which is superior to tape, cable ties, and hook & loop products. The Cable Clamp is forever reusable and can be easily opened and closed with one hand utilizing its unique Quick Connect Quick Release feature. Constructed with durable polymers and stainless steel, it features self-aligning, self-adjusting, and self-locking technologies. Tremendously useful with real-world applications, the Cable Clamp is the solution to your wiring nightmares!
It has been designed to accommodate a wide array of applications, including organizing standard desktop computer wiring to bundling extension cords as long as 100′. Additionally, it’s offered in an attractive assortment of colors and private labeling is available.
The reusable Clamp’s unique self-aligning, self-adjusting, and self-locking features allows it to be easily and rapidly engaged with a gentle squeeze on the jaws, and just as easily removed with a slight lift of the specially designed trigger. Each Clamp has up to ten adjustable settings and will not cause damage to sensitive systems such as CAT 5 or fiber optic lines since they cannot be over cinched.