- Compatible with incandescent, halogen, compact fluorescent (CFL), fluorescent, LED lighting, and motors up to 1/8 hp
- Modes include: always off, always on, and motion activated
- On-time is adjustable from 5 to 30 minutes
- Photocell allows switch to operate based on existing lighting to save energy
Your home’s switches can now be transformed to motion sensing lights. Replace your existing 3-way switches with this PIR sensor and you’ll be able to control your light by simply walking into the room. Having a motion sensor at each end of a hallway or large room makes sure your path is always lit, no matter which direction you are entering from.
When in AUTO mode, the sensor will turn the light on and off based on the detection of motion to ensure lights will only be on while the room is occupied, saving energy. The amount of time the light stays on after it detects motion is adjustable from 5, 10, 20, or 30 minutes. A photocell within the switch also evaluates the current amount of light to determine whether or not the lights should be turned on. If it senses that there is an ample amount of existing light in the room, the switch will not turn on the light, even if it detects motion. You can also easily switch to ON or OFF mode if you don’t want to use the switch as a motion detector by sliding the button located on the front of the switch.
You’ll get powerful and high quality sound to fill the entire room without the hassle of installing rear speakers. Designed to match Sony’s BRAVIA televisions, this sound system is the perfect complement to existing Sony theater systems. Mount the sound bar directly to your BRAVIA television, hang it on a wall, or place it on a shelf. Using Sony’s S-Force Surround technology, this system delivers simulated surround sound from just two compact units to eliminate the need for rear speakers.
The sound bar includes three HDMI inputs with 3D so you can connect multiple devices to the receiver at once. Then, use only one HDMI cable to connect all your devices, including the receiver and all connected devices, to your television. Your television will send and receive signals from the receiver through a single HDMI cable, cutting back on cable clutter. Standby pass-through technology allows you to access the connected devices, even when the sound bar is powered down. A remote with two AA batteries are included, giving you full control of the sound system from anywhere in the room. You can even operate the system directly from your television screen with the Sony BRAVIA Sync features on selected television models. Read more
- Kills 99.9% of bacteria and eradicates household bed dust mites
- 3-step system with 2-stage HEPA filtration
- Begins to kill Type A H1N1 virus in less than two seconds
- Works on most household fabric surfaces
The RaycopP MG100W Magnus Anti-bacteria UVC Sanitizing Handheld Vacuum Cleaner is the first UV anti-allergy heavy duty vacuum cleaner that kills 99% of bacteria and eliminates almost 94% of dust mites. Raycop has even been shown to deactivate the H1N1 Influenza A virus. It is specially designed to clean beds, linens and other fabrics, helping to create a healthier home. British Allergy Foundation and Tokyo Allergy Center have proved Raycop’s special allergy care function. It uses a patented three-step sterilizing, cleaning and filtration process. First Raycop uses a vibrating pad to shake dust mites and allergens free from fabric. Then a high-quality UV-C sterilization lamp helps eliminate bacteria, mites and virus. Finally a powerful motor vacuums up any dust and remnants – with a HEPA filter ensures that they cannot escape back into the room. Raycop cleans deep into household fabrics and can be used to clean mattresses, sofas, chairs, futons, crib pads, bedding, pillows and curtains. For those who suffer from asthma or allergies – the Raycop Magnus will help promote a healthier lifestyle. Read more
If you crave simplicity, style and functionality, Audio Solutions has the answer for you with their new Audio Mount 2.1. The Audio Mount 2.1 simplifies consumer installation of flat panel TVs by integrating a sturdy wall-mount bracket with a built amplifier, subwoofer and external speakers, revolutionizing the ever-growing flat panel TV market. The 2.1 model allows you to fit any 32 inch to 55 inch screen because the speakers will expand or contract to fit whatever size your TV is. This state of the art flat panel TV mount removes the need of purchasing expensive stereo receivers, cables, subwoofer and speakers by integrating a full 2.1 sound directly into the mount.
The Audio Mount 2.1 incorporates dual 100 watt mid-bass drivers and silk dome tweeters to provide low distortion and smooth vocal quality. The subwoofer is built into the backside of the mount in its patented acoustic manifold, which increases efficiency, reduces distortion and controls cone motion for high impact, high output bass. Also within that manifold is a built in amplifier to power the speakers and subwoofer.
There is no need to run out and purchase expensive audio cables to connect the mounts built in speakers and subwoofer to the TV. All the speaker wires are built in to the bracket so you don’t see any cables. The mount comes with an analog audio cable that easily plugs into the back of your TV and the mount. Upgrade your sound by using a toslink cable.
The mount also comes with a remote control that allows you to control and adjust the volume, balance and output levels for the speakers and subwoofer. Read more