Install a Dual Rocker Switch to Control a Fan/Light Without Running Any Wire and Avoid Tearing into Walls
The AD HOC Electronics Fan/Light Combo Wireless Light Switch Kit is the ideal solution for adding independent operation of a ceiling light and fan into the space of one wall mounted dual rocker switch – without running any wires or needing to enter you walls! The Light/Fan Combo Switch Kit includes two RF relay receivers and one dual rocker self-powered wireless light switch. One receiver is wired to the light and the other is wired to the fan, the receivers are then stored in the light box. Because the light switch is a dual rocker, one rocker is programmed to the light receiver and the other is programmed to the fan receiver through a simple learning process. This battery-free wireless light switch saves you time and hassle by eliminating the need for wires and switch boxes. Traditionally the wireless light switch is surface mounted on a wall with screws or industrial tape but can also be used in a standard switch box or as a wireless hand held remote. The switch is powered by EnOcean technology that converts the press of the switch into a small amount of electricity. This electricity is used to transmit a radio frequency (RF) wireless signal that communicates with the relay receiver. Perfect when replacing a single light with a new light/fan combo. Easily control the light and fan separately without the hassle of installing a second switch and running new wires.
The Scosche Industries solCHAT™ II features an integrated solar panel that will continuously recharge the lithium ion battery. The unit can be mounted on your windshield or visor, so you’ll never have to use an uncomfortable earpiece again! With DSP echo cancellation, you’ll have crystal clear transmission, even in noisy vehicles. Once set up, you’ll be able to perform most of your phone’s functions, such as answering, toggling between calls, etc. with the solCHAT II multi-function button. A USB charging cable and car adapter are included for directly charging the unit.
Attach the Scosche Industries IPUSBM flipSYNC™ to your keychain and you’ll always have a charger at your fingertips. Connect one end into your iPod or iPhone and the other into a USB port and you’ll always be able to charge your device, whether you are at home or on the road.
The Hose Bibb Lock is designed to prevent both water theft and vandalism to outdoor faucets and hose spigots.
The Hose Bibb Lock’s fitting assembly screws securely onto the end of any standard garden Hose Bibb, yard hydrant, or vacuum breaker. The cover is placed over the fitting assembly, and locked with the included padlock.
The Hose Bibb Lock is designed so that the cover and padlock spin freely around the fitting assembly, preventing anyone without the key from using the faucet.
Water won’t flow – even if the handle is turned to the full open position unless you remove the Hose Bibb Lock.
The interference from a wall mount TV can wreak havoc with your IR control system. Xantech designed this Universal Micro Link IR Receiver to resist the interference from plasma, LCD and LED TVs, as well as fluorescent and compact fluorescent lighting (CFL), and sunlight – so you can mount this receiver in any room with confidence. The Universal Micro Link IR Receiver Kit makes it possible to control up to four different audio and video components behind solid doors or walls using your existing IR remote.
The IR receiver is a small peep-hole style infrared repeater assembly, perfect for a nearly flush in-wall or cabinet installation with minimal footprint for a professional finish. The high sensitivity and extended range of this receiver allows it to receive IR commands up to 120 feet away, it also includes a ‘talkback’ LED so you’ll know the command was received and sent to the emitter. Using the included connecting block, you can connect the IR receiver to the four IR emitter ports. The connecting block supplies power to the IR receiver using the included power supply. The connecting block receives IR signals coming from the IR receiver and distributes the IR signals out to your audio and video components using the included IR emitters. With a Xantech IR Kit, equipment can now be concealed for clean room design. In addition, a centralized IR receiver means there is only one IR target resulting in improved remote control interaction. Featuring color-coded connectors, a Xantech IR Kit is easy to install, and allows a worry-free installation. Includes Black, Brass and White bezels.
The Carson Optical LM-50 DeskBrite™ 400 Magnifier is a 1.75x LED magnifier desk lamp with a 4x power spot lens. The DeskBrite features 10 super-bright LED’s to illuminate your viewing subject. The large crystal-clear acrylic lens ensures a bright, sharp and clear image. Open the hinge for use as a magnifier or close the hinge for use as a desk lamp. The DeskBrite magnifier lamp plugs into any standard outlet, no batteries are required. The DeskBrite is a perfect and handsome addition to any desk.