The UPM THM301A Programmable Thermostat is equipped with 5 and 2 day programming for serparate programming for weekdays and weekends with four settings per day. This thermostat is pre-programmed for your convenience or you can set your own programs to better fit your needs. This thermostat is equipped with a Pre-Comfort Recovery system that will activate the heating or cooling in advance of the actual set program time so that the room will be at the desired temperature at the start of the comfort program time. It is normal for the system to be activated earlier – up to a half hour for heating and one hour for cooling – than the actual set program time.
The WCT-32 Wireless Comfort™ Thermostat is a 7-Day programmable, battery powered thermostat. This thermostat communicates via an RF wireless data link to a relay control module located near the HVAC equipment.
The Wireless Comfort Thermostat can control single stage, multi-stage and heat pump equipment with up to 3 stages of heating and 2 stages of cooling.
The temperature of a “problem room” fails to match the thermostat, so it’s chilly in winter or hot in summer, or uncomfortable in both seasons. Problem rooms can have many causes, but often rooms distant from the central furnace/ air conditioning unit are difficult to heat and cool effectively.
Sliding directly into a standard room register, the AirFlow Breeze Ultra pulls extra air from the duct to raise or lower the temperature of a room by 3-5 °F. As a result, the AirFlow Breeze Ultra restores comfort to the vast majority of problem rooms, in both winter and summer.
Simply slide the AirFlow Breeze Ultra directly into a floor register opening measuring 6″x10″ or 6″x12″ and plug into a standard outlet – no further steps are required! For wall and ceiling mounts, simply drill two screw holes and attach the AirFlow Breeze Ultra to the surface using standard screws. The AirFlow Breeze Ultra may be powered either from the front or back with the included 6′ power cord.